February 2019 – Red Dot, Line and Cross Line Laser Modules

The Clearest Separate Crystal Lens Red Line Laser Module

If users are not able to get highly clear line alignment on multiple raw material surfaces immediately, unless the operation of formal line drawing or line printing device, it is a quite nice experience for users to adopt a high intensity beam emitted red line laser module. It is generating red laser light directly from 650nm red laser diode, once it is equipped with the most qualified separate crystal lens, within wide range optic lens degree, this laser line generator will easily get highly fine and clear red reference line projection in distance easily. Only if users are making proper installation and adjustment of red laser to correct position, unless its operation under sunlight, it gets quite satisfied line generation result for any type of industrial and high tech line measuring works easily.

Once line alignment work is processed under a lot of working occasions, it would be used under quite harsh environments. For instance, in process of highly clear line alignment under military targeting, laser medical treatment or other high tech fields, red line laser module is being made with high duration aircraft used aluminum alloy housing tube, within wide range operating temperature of -10 degree to 45 degree Celsius, it is not affected, while still maintain bright enough red line projection in use. It is being made with quite durable structure, within freely installed distance of 0.3 meter to 3 meters, this laser line generator is always easy to be installed on desired machine or device, and then achieving quite satisfied red line projection on any vertical or horizontal surface quickly.
When red line laser module is being equipped with the best quality separate crystal lens, it is projecting highly uniform red laser beam in use. In special occasion of line alignment at quite long distance, red reference line is showing its superiority of the same line brightness from middle part towards both ends. Red alignment laser line is keeping the finest line thickness of only 1mm to 2mm at 2 meters distance from beam aperture. When focused beam made red laser gets easy screw of laser beam aperture, red line thickness can achieve the most satisfied result, and then achieving high level of accuracy line alignment within the maximum work distance of 25 meters.
Whatever kind of working surface, after enough learning of line length, line thickness and work distance from beam aperture, red line laser module is recommended with correct output power and optic lens degree, which will easily make sure of no mistake line projection efficiently. Under operation with a high power red laser up to 50mW to 100mW, besides its operation for long distance, it is also generating quite powerful light to human eyes. Users should remember to wear 650nm wavelength preventing laser safety goggles and avoid eye exposure until achieving accurate line alignment freely.

Constant Aligned Separate Crystal Lens Red Line Laser Module

If users are trying to make continuous line alignment on different targeting surface, it would be quite complex work until users are selecting a quite professional line measuring device as expected. On basis of great work and technical innovation of more and more practically used line measuring device, such as a red line laser module, after quite easy connect with an external DC input power supply and perfectly designed thermal emitting system, it is easily getting improving beam stability and highly stable line projection in any industrial and high tech line aligning works effectively.

Being made with an external DC input power supply, usually the genuine line alignment work with a red line laser module is easy and quick. It is not the same as a formal line drawing device, such as a simple blocking board, square meter or any other mechanical line aligning devices, this laser line generator is being made with the most compact structure of only 16mm and 26mm. It is always operated without serious limitation of high lighting, long distance and other hard reaching places etc. In addition, according to its design with high temperature and strong corrosion preventing designed electric wires extension for both laser line generator and DC power supply, it is always getting quite convenient installation and adjustment, and then achieving quite satisfied line projection in distance easily.
In order to get highly clear line projection on multiple targeting surfaces, red line laser module is adopting the most qualified separate crystal lens. Even though red line projection is processed at quite long distance, it is showing its superiority. Whatever kind of work surface red line is pointed, it is available with the same line brightness from middle part towards both ends. According to enough learning of line length, line thickness and work distance from beam aperture, only if this alignment laser is selected with correct output power and lens degree, it is obtaining the most accurate line generation on any vertical or horizontal surface quickly.
When line alignment is processed under harsh working environments, with the assistance of a laser alignment mounting bracket, red line laser module is easily used in any working place. After quite easy adjustment of line targeting direction within three dimensions and line thickness, this industrial stabilized alignment laser always gets quite convenient line generation within the maximum work distance of 25 meters. Once line alignment work is processed with a high power red laser up 50mW, besides its operation for long distance, it should also be used with high attention to powerful and intense red light and thermal energy. Only if users are wearing 650nm wavelength preventing laser safety goggles and avoiding eye exposure, it gets highly secured line alignment perfectly.

Highly Straight High Power 635nm Red Line Laser Module

Not the same as a quite simple square meter or blocking board, after the selection of quite advanced laser diode tech applied high power 635nm red line laser module is able to work with highly straight and fine line generation in distance. It is being made with qualified import 635nm red laser diode and high attention to industrial stabilization. When this laser line generator is getting connect with an external DC input power supply, it is easily making sure of highly clear and accurate line projection on any vertical or horizontal surface effectively.

Owing to the use of separate metal heat sink cooling system, comparing with formal output power made laser line aligning device, this high power 635nm red line laser module is leaving enough space for its cooling system. Together with aircraft sued aluminum alloy housing tube design, this laser line generator just gets enough space reserving for its thermal emitting, and highly stable red line projection in long term use. This durable structure designed high power red laser is bearing wide range operating temperature within -10 degree to 45 degree Cellules. Even though laser line alignment is processed under mechanical shocking, calibration or moving, after proper installation, it is just keeping the most reliable line projection in long term use easily.
Unless the operation under sunlight, high power 635nm red line laser module is not only generating the purest red light emission from beam aperture, but also making sure of highly clear line generation in distance and high lighting efficiently. Either glass coated lens or separate crystal lens it is equipped, this laser line alignment tool is generating high linear quality red reference line in distance. Within freely selected optic lens degree of 10 to 110 degree, it is obtaining different line length within 0.5 meter to 6 meters. According to the most strict laser beam stability test up to 24 hours, after its operation by skilled users or professionals, and operated within maximum operating time of 8 to 10 hours per day, this alignment laser is keeping the most reliable performance and excellent fine line projection.
In multiple industrial and high tech precise device manufacturing work fields, according to the design with high duration aircraft used aluminum alloy housing tube design, this high power 635nm red line laser module maintains excellent performance under mechanical shocking, calibration or moving etc. Within wide range output power of 150mW to 500mW, in order to get clear and accurate line generation in continuous work, users should pay high attention to powerful and intense red light and thermal energy. After proper wearing of 635nm wavelength preventing laser safety goggles and avoid eye exposure to beam aperture, this industrial stabilized laser line generator makes sure of secured line alignment constantly.

The Finest High Power 635nm Red Laser Line Generator

In order to get quite convenient line projection at quite long work distance or high lighting working occasions, it would be workable for users to select a high power 635nm red laser line generator. When it is getting extremely high power within 150mW to 500mW, after specially designed separate metal heat sink cooling system and good equipment with an external equipped DC input power supply, this durable structure made red laser module makes sure of superior nice thermal conductivity, and highly stable red reference line projection in continuous work easily.

Comparing with formal line printing or line drawing device, high power 635nm red laser line generator is projecting highly visible and bright red light at quite long distance. For the most important of all, the genuine laser line alignment is not seriously limited for real work distance. When it is selected external electric power source, it is easily getting continuous red line projection in use. The real red line alignment work has no need to make battery change. After the accept of wide range electric current within 100V to 240V, this high power 635nm red laser module is applied for majority of country and regions. Even though red line projection is processed under high temperature or strong corrosion, it is not affected of its beam stability.
In any type of industrial and high tech line alignment work, high power red laser line generator is required to perform with high level of beam stability. When high power 635nm red laser diode is applied, it is making great technical innovation of industrial stabilization. After the use of separate metal heat sink cooling system, this laser line module is also being made with square shape aircraft used aluminum alloy housing tube. Whatever kind of precise device manufacturing works, it is bearing wide range operating temperature within -10 degree to 45 degree Celsius, also keeping the most reliable red line projection under mechanical shocking, calibration or moving etc.
Whatever kind of working surface, including those of hard reaching places, high power 635nm red laser line generator is operated as an accessory part of any other device or equipment. It is getting the best design part of APC, ACC driving circuit board. Within daily operating time of 8 to 10 hours, after enough time leaving for laser module tube cooling down, this alignment laser gets superior nice laser light cycling use and extremely long serving lifetime in continuous work. Whenever it is projecting powerful and intense red light and thermal energy from beam aperture, users should pay special attention to laser safety issue and remember to wear 635nm wavelength preventing laser safety goggles until achieving secured line alignment perfectly.

Continuous Measured High Power Pro Red Dot Laser Alignment

How do you like to get clear and accurate enough dot projection in distance efficiently? Unless the adoption of any simple dot measuring device, such as a simple laser pointer or a manual sticker, it would become the most wonderful experience for users to adopt quite high power pro red dot laser alignment. It is a high purity 635nm red laser diode light emitted laser device, on basis of at least 3 times brighter light emission than formal 650nm red laser device and excellent thermal emitting system, this high power 635nm red laser module just becomes a quite professional and practically used dot measuring device.

In multiple industrial and high tech precise dot measuring work fields, high power pro red dot laser alignment is being made with extremely qualified import 635nm red laser diode as its beam emitting source. It is not the same as a simple red laser pointer device, after the adoption of separate metal heat sink cooling system, this laser diode module gets even longer space reserving for its separate metal heat sink cooling system. After the use of aircraft used aluminum alloy hosing design, this high power 635nm red laser gets superior nice thermal conductivity and improving beam stability in continuous red dot projection in distance effectively.
In order to get clear enough dot projection in distance and high lighting working occasion, high power pro red dot laser alignment is being made with qualified glass coated lens. It is getting much better performance than formal plastic coated lens. Even though the genuine red dot projection work is processed for quite long time or quite long work distance, this laser diode module is still keeping high laser beam transmittance and highly clears red dot projection in use effectively. In occasion that the genuine red dot projection is processed within 8 to 10 hours per day, after enough time reserving for laser tube cooling down, this alignment laser keeps extremely stable performance and super long serving lifetime in proper use.
According to the design of APC, ACC driving circuit board, even though there is quite rapid temperature changing of laser tube, high power red dot laser alignment is still not affected, but just preventing serious electric current impacting and maintaining excellent laser light cycling use in use. Once super powerful red laser light and thermal energy are produced from beam aperture, after proper wearing of 635nm wavelength preventing laser safety goggles and avoiding eye exposure to red laser radiation and reflection, this alignment laser always makes sure of secured and free dot projection in long term work perfectly.

The Most Accurate Aligned 635nm Glass Lens Red Laser Diode Module

If there is not a good solution for users to get accurate enough dot projection in distance and other complex working environments, unless the use of any simple manual dot measuring device, such as a simple laser pointer or sticker, it would become quite nice result for users to make use of 635nm red laser diode module. When it is generating quite intense red laser light from 635nm red laser diode directly, equipped with basic design of metal heat sink inside its aircraft used aluminum alloy housing tube, it is becoming a quite professional used laser dot alignment tool. Only if this dot laser alignment tool is properly installed and adjusted to correct position, it makes the clearest and the most accurate dot generation on any vertical or horizontal surface easily.

Comparing with a simple sticker or laser pointer, whenever the real dot alignment work is processed with 635nm red laser diode module, it would become totally different experience for any industrial and high tech dot measuring work fields. It is available with wide range output power of 5mW to 100mW. Owing to the use of 635nm red laser diode tech, this direct light emitted laser dot alignment tool gets at least 3 times brighter light emission than formal 650nm red laser with the same output power. In addition, on basis of quite special TEM00 laser beam mode, whatever kind of working surface, it is just generating good round shape and quite small size red dot projection in use.
In order to get clear enough dot projection in distance, after good use of qualified glass coated lens, 635nm red laser diode module is keeping quite high laser beam transmittance and high light purity in continuous work. Even though it is required to work for quite long time or quite long distance, it is still working without any worrying about laser light decay or blur in continuous work. In order to maintaining excellent laser light cycling use, this red laser dot alignment tool passes through quite strict tests, including super rapid electric current adding and up to 24 hours aging preventing test, this red laser module just keeps stable enough dot projection in continuous work.
When 635nm red laser diode module gets the most important design part of aircraft used aluminum alloy housing tube and copper made laser diode core part, within wide range operating temperature, it is obtaining super nice thermal conductivity and highly stable red dot projection under all kinds of mechanical shocking or calibration or moving etc. If users are paying high attention to powerful red light and thermal energy, after proper wearing of 635nm wavelength preventing laser safety goggles, this industrial stabilized alignment laser gets free and accurate dot alignment constantly.

Constant Aligned High Power 650nm Red Laser Diode Module

If there is a quite long work distance for users to make highly clear dot alignment, none of simple sticker or laser pointer is workable at all. In order to make real dot aligning work much more convenient and easier, formal manual or mechanical dot aligning device is substituted by advanced laser tech applied high power 650nm red laser diode module. This is a quite professional and industrial stabilized laser dot alignment tool. When this high power red laser is manufactured with excellent thermal emitting system and separate metal heat sink cooling system, it would be workable with improving beam stability and highly stable red reference dot projection in long distance use.

Not the same as any simple dot sticker, high power 650nm red laser diode module is getting beginning high power within 150mW to 500mW. It is not simply used for temporary dot positioning work, but should have to work with constant dot aligning work on different targeting surface. It is being made with high attention to thermal emitting system. Besides its adoption of external metal heat sink cooling system, this dot laser alignment tool is also using aircraft used aluminum alloy housing tube. When it is getting larger space reserving as its cooling system and getting superior nice thermal conductivity from its metal housing, it is easily obtaining highly stable red reference dot projection efficiently.
When dot aligning work is processed at quite long work distance, it is still requiring with good laser beam stability and beam visibility in use. It is employing quite qualified glass coated lens, equipped with import 650nm red laser diode, this high power 650nm red laser diode module just keeps quite clear laser beam transmittance, and then getting highly clear dot generation on any vertical or horizontal surface easily. In order to make sure of highly clear dot generation, users can make quite easy adjustment of laser beam focus. High concentration red laser light is converting into quite compact size red dot, making sure of the most accurate dot generation in distance immediately.
Whatever kind of working surface it is used, high power 650nm red laser diode module is required to work for long term without disturbing. Owing to the use of APC, ACC driving circuit board, in occasion of quite rapid temperature increasing of laser module tube, this alignment laser still gets superior nice preventing of electric current impacting. Within daily operating time of 8 to 10 hours, it gets reduced possibility of laser diode and electric driving circuit board burning out or damage, and then obtains the most stable red alignment laser dot projection in long term use. When users are remembering to wear 650nm wavelength preventing laser safety goggles and avoiding eye exposure to thermal energy, this industrial stabilized laser dot alignment just gets free and secured measurement perfectly.