October 2019 – Red Dot, Line and Cross Line Laser Modules

Constant Aligned Pro Red Cross Laser Alignment

Being made with the best quality glass coated lens and import 635nm red laser diode, whenever laser tech engineer is developing pro red cross laser alignment, it is able to work with extremely intense and powerful red laser light emission and quite complex two perpendicular red lines with accurate 90 degrees. When it is adopting modifying electric power source of DC input power supply, it is not only getting continuous electric power source, but also ensuring extra large space reserving as its cooling system and assuring highly stable red cross line targeting result in distance.
When pro red cross laser alignment is being made with 635nm red laser diode, it is always projecting high purity red laser light, which is getting at least 3 times brighter laser light from formal 650m red laser device. In addition, according to quite special laser beam mode of TEM00 and quite low laser beam divergence, it is keeping work with extremely fine and straight red cross line source in use. At the same time, according to quite easy adjustment of laser beam focus, cross laser module gets super rapid red light concentration and extremely fine red cross line source projection in distance easily.

Under proper use of qualified glass coated lens, selected from 10, 15 and 110 degree, pro red cross laser alignment is generating different cross line length and thickness in use. When it is producing selected cross line length within 0.5 meter to 6 meters, under quite strict laser beam stability tests up to 24 hours, it is just making highly clear cross line targeting for multiple application fields, such as laser alignment for screen printing system, laser medical therapy, military targeting and heat transfer machine etc. Whenever the genuine cross line targeting work is processed within the maximum distance of 25 meters, it is just keeping super fine cross line targeting and no decay light emission in continuous work.
According to easy use of APC, ACC driving circuit board, pro red cross laser alignment is keeping work with constant electric current supply and output power emission. Even though there is quite rapid temperature increasing of laser module tube, the intelligent feedback system is protecting laser tube from burning out or damage, which is just keeping the most reliable and stable cross line targeting in long term use. In addition, according to perfect attention to the most powerful red laser light and thermal energy from high power alignment laser, only after correct wearing of laser safety goggles, it achieves easy and safe cross line positioning result in distance perfectly.

The Most Precise 635nm Red Dot Laser Module

In any possible working occasion where users are trying to make the most accurate dot positioning result at quite long work distance, not simply used for close distance and formal hand reaching places, it would be always quite nice experience to make use of 635nm red dot laser module. It is projecting extremely pure and bright red laser light directly from 635nm red laser diode. When this dot laser alignment is getting modifying design of external electric power source and inner tube thermal emitting system, it is always workable with superior nice thermal emitting and highly stable red reference dot projection in use.

When dot alignment is processed for quite long time, not the same as a red laser pointer only used for formal presentation or entertainment use, 635nm red dot laser module is always workable for continuous dot projection in those of industrial precise device manufacturing work fields. Under the selection of the same output power with 650nmred laser device, it is just getting at least three times brighter red laser light and even smaller size red reference dot in use. Although this 635nm red laser is available with a bit higher price, however, a lot of engineers would prefer to use it for long time continuous dot alignment work.
In order to get the most accurate dot alignment in multiple working environments, 635nm red dot laser module is being made with durable aircraft used aluminum alloy housing tube. When it is used for dot positioning work for military targeting or laser medical therapy work etc, owing to its wide range operating temperature stabilization within -10 to 45 degree Celsius, it is not affected at all, but maintaining highly bright and visible red dot projection. For the most important of all, owing to its small size tube diameter of 16mm and 26mm, it is allowing quite convenient installation on any other industrial device and quite nice dot positioning result on vertical or horizontal surface.
Whatever kind of application field it is used, 635nm red dot laser module is being used as an accessory part. The extending electric wires for both red laser and DC power supply are assuring quite convenient installation within the maximum work distance of 3 meters. Under easy adjustment of laser beam focus, once highly intense red laser light is temporarily focused, this alignment laser is making immediate and the most accurate dot positioning result. Whenever users are paying special attention to powerful red light and thermal energy from beam aperture, only after correct wearing of laser safety goggles, this industrial dot laser alignment tool achieves secured measurement constantly.

Precise Projecting 650nm Red Line Laser Module

Unless the adoption of formal square meter, blocking board or triangular meter, in order to get easy and accurate line alignment on any raw material surface, it is always quite wonderful experience to make use of a 650nm red line laser module. It is projecting moderate brightness red laser light from 650nm red laser diode. It is in need to make continuous red reference line targeting. When this laser line generator is made with inner thermal emitting system and continuous electric power source, it is able work with extremely clear and fine red reference line projection on any vertical or horizontal surface.

In order to make quite easy line targeting on multiple raw material surfaces, without the limitation of real work distance, high height and other complex working environments etc, 650nm red line laser module is making quite convenient line projection on any targeting surface. According to the use of DC input power supply, not the same as formal alkaline battery power source, it is making continuous red reference line projection. It is getting selected output power of 5mW to 100mW, although it is only projecting moderate brightness red laser light, however, it is enough to fulfill moderate accuracy line projection for various industrial precise device manufacturing works.
With the assistance of qualified glass coated lens or separate crystal lens, even though 650nm red line laser module is used for quite long time or quite long time continuous work, this industrial stabilized laser device is always workable with quite high fineness red reference line projection. It is getting selected optic lens degree within 10 to 110 degree, after production into different line length of 0.5 meter to 6 meters, it is always making highly precise line instruction. The real laser line alignment is not limited by manual labor force input, only if it is getting correct use of output power and optic lens degree, it obtains no mistake line generation easily.
This 650nm red line laser module is only used as an accessory part, under assistance of laser alignment mounting bracket, it is making quite convenient line positioning easily. It is also getting extending electric wires, thus usually within the maximum installation distance of 3 meters, it is easily mounted on any industrial machine or device, and also achieving the most rapid line positioning results. In addition, under high attention to any possible hurt caused by serious thermal energy and proper wearing of laser safety goggles, this industrial line laser alignment tool achieves the best measurement result constantly.

Intense Beam Emitting 650nm Red Dot Laser Module

If there is not a quite efficient solution for users to make highly clear and accurate dot alignment on various targeting surfaces, it is not helpful at all to only use formal laser pointer or other manual dot projecting device etc. In order to get quite convenient and accurate enough dot alignment, it is a quite nice job for users to adopt 650nm red dot laser module. It is a direct diode emitting dot aligning tool. According to correct selection of output power and installation on desired machine or device, this red laser alignment makes sure of immediate and clear dot generation on various targeting surfaces.

The real experience of 65nm red dot laser module is quite easy and convenient. Comparing with quite simple red laser pointer with alkaline battery power source, in order to make continuous red reference dot projection, it is selecting external electric power source of DC input power supply. When red laser diode is available with wide range output power of 5mw to 100mW, only if it is supported with 3V or 9V operating voltage, this dot laser alignment tool is not only projecting quite intense and powerful red laser beam, but also generating extremely clear red reference dot projection within the maximum work distance of 25 meters.
When dot alignment work is processed for quite long time, under multiple working environments, 650nm red dot laser module is being made with the most durable aircraft used aluminum alloy housing tube and inner copper made laser diode core part. The employment of import 650nm red laser diode has just made the real dot alignment workable with at least 40% improvement of laser beam stability in continuous work. For the most important of all, under operation for military targeting, laser medical therapy or lab experiment works, under quite harsh occasion of mechanical shocking, moving or calibration etc, red laser dot alignment is not affected at all.
After easy adoption of laser alignment mounting bracket, including those of quite hard reaching places, 650nm red dot laser module is allowing quite convenient installation and adjustment, generating highly clear red reference dot on any vertical or horizontal surface immediately. In occasion that high power alignment laser up to 50mW is used, under operation of highly clear dot alignment at quite long work distance, it is also generating serious thermal energy from beam aperture. Under high attention to laser safety measure and proper wearing of laser safety goggles, this industrial dot laser alignment tool always achieves safe and free measurement.

The Easiest Aligned 650nm Red Dot Laser Module

In order to make the most accurate and quick enough dot positioning result on various raw material surfaces, including those of quite hard reaching places and complex working environments where human hands cannot reach easily, it would be much easier job for users to adopt an advanced laser diode tech applied 650nm red dot laser module. It is generating direct and quite intense red laser beam from 650nm red laser diode. After production with constant electric power source from DC input power supply and being selected with correct output power, this dot laser alignment tool would just make quite easy and immediate red laser dot projection.

When dot alignment is processed for quite long time, not simple used for temporary dot positioning work as a simple red laser pointer, this 650nm red dot laser module is always bringing users quite special and immediate red reference dot projection in continuous work. It is being made with inner metal heat sink cooling system and copper made 650nm red laser diode core part, after perfect integration with aluminum alloy housing material, after production into a real laser dot alignment tool, it is always achieving excellent thermal conductivity and increasing stability in continuous red dot projection work.
According to the adoption of qualified glass coated lens, without any worrying about laser light decay or blur in continuous work, 650nm red dot laser module is always keeping work with high laser beam transmittance and highly clear line projection in use. For the most important of all, after perfect equipment with adjustable focus, the front glass cylindrical lens enables quite easy screw and then achieving the most compact size red laser dot projection in use. Unless it is pointed under sunlight, after correct selection of output power, this red laser alignment tool produces the most accurate red reference dot projection within the maximum work distance of 25 meters.
Every time 650nm red dot laser module is being made with 16mm and 26mm diameter tube, whatever kind of working surface it is pointed, it is always making quite easy and convenient dot positioning result in use. In addition, under operation with a laser alignment mounting bracket, this accessory part is making quite easy dot positioning result on any vertical or horizontal surface immediately. Whenever the most powerful and intense red laser light is generated from high power red laser up to 50mW to 100mW, only after correct wearing of laser safety goggles, this industrial stabilized red laser module device achieves perfect alignment constantly.