December 2019 – Red Dot, Line and Cross Line Laser Modules

30mW 650nm Powell Lens Red Line Laser Module

Not simply used for quite close distance line targeting, in order to get fine and clear enough line alignment onto targeting surfaces, formal line printing work cannot be workable at all. In process of the most accurate line projection at a bit longer work distance and have to work for quite long time, it is becoming quite nice experience for users to make use of 30mW 650nm red line laser module. It is projecting moderate brightness red laser light from 650nm red laser diode. When it is selecting quite high quality optic lens with different fan angle, this laser line generator is projecting various line length and line thickness. Only after correct selection of output power and optic lens degree, it achieves highly clear and fine line projection in distance immediately.

When line alignment work is processed for quite long time, not only used temporarily, 30mW 650nm red line laser module would be made with super strong industrial stabilization. According to the use of inner metal heat sink cooling system and APC, ACC driving circuit board inside aircraft used aluminum alloy housing tube, this 26mm diameter tube made laser line generator always gets super nice thermal conductivity, and extremely stable red reference line projection in continuous work.
In formal industrial line aligning work, 30mW 650nm red line laser module is used as an accessory part of any other machine or device, which is able to make continuous red reference line projection for multiple work fields, such as laser cutting, textile garment processing, sand milling and other high tech line aligning work fields. Whenever it used within continuous work within 8 to 10 hours per day, after enough time and space leaving for tube cooling down, this red line projecting laser alignment tool achieves superior nice thermal conductivity and extremely stable red reference line projection in long time use.
Under the most special use of Non gaussian beam distribution laser light from Powell lens, 30mW 650nm red line laser module is keeping work with the finest and highest straightness red reference line than formal plastic coated lens or glass coated lens. When it is keeping the same brightness red alignment laser line projection from middle part towards both ends, under correct selection of optic lens degree and output power, this laser line generator module would always achieve quite satisfied line projection on any vertical or horizontal surfaces effectively. Only after high attention to powerful laser light and thermal hurt to human eyes, after proper wearing of laser safety goggles, it always achieves high security line alignment constantly.

Focus Adjustable 650nm 5mW Red Laser Diode Module

Without any serious relying on manual dot projecting, such as a simple laser pointer, sticker or others, once there is serious limitation of work distance, high height and other complex working environments, it would be a quite nice experience to make good use of 650nm 5mW red laser diode module. It is projecting moderate brightness red laser light directly from 650nm red laser diode. Once it is being made with inner cooling system and continuous electric power source from DC input power supply, this industrial red dot laser is workable with highly stable and clear dot projection onto targeting surfaces.

Not the same as a quite simple red laser pointer, in order to make continuous dot projection on various targeting surfaces, 650nm 5mW red laser diode module is being made with nice thermal emitting system. Designed with inner metal heat sink cooling system and cooper made red laser diode as its core part, this dot laser alignment tool is not only limited for temporary dot positioning work, but just workable with continuous red reference dot projection from beam aperture. On basis of superior nice thermal conductivity from durable aircraft used aluminum alloy housing tube, 650nm red laser is performing perfectly in long term use.
Designed with the best quality glass coated lens and a series of quite strict laser beam stability tests up to 24 hours, 650nm 5mW red laser diode module is keeping work with high laser beam transmittance, and highly clear red reference dot projection in continuous work. It is only projecting formal brightness red laser light from inner 650nm red laser diode. Under quite special use of glass window in front of laser beam aperture, even though red laser dot alignment is used under moisture or dust working condition, it is still keeping reliable performance, without any appearance of laser light decay or dim in continuous use.
With the assistance of laser alignment mounting bracket and quite special use of electric wires extension for both 650nm 5mW red laser diode module and DC input power supply, within the maximum work distance of 3 meters, it is making quite convenient and easy red reference dot projection in close distance immediately. On condition that users are making quite simple adjustment of laser beam focus, red laser beam is immediately concentrated, and forming into the most compact size red alignment laser dot projection in use.

Uniform Distribution Beam 650nm Red Line Laser Module

In various industrial precise line projecting work fields, either it is used for close distance or long distance, none of manual or mechanical line aligning device can be comparable with advanced laser tech applied device as expected. When users are adopting a 650nm red line laser module, on basis of perfect equipment with the best quality separate crystal lens and continuous electric power source from DC input power supply, it is just becoming an industrial stabilized laser device for any industrial and high tech line aligning works. None gaussian beam distributed laser line generator always ensures the finest and the highest straightness red reference line projection onto targeting surfaces.

When line alignment work is processed onto various working surfaces, 650nm red line laser module is making good use of 650nm red laser diode. Available with wide range output power from 5mW to 100mW, it is not only projecting highly visible red laser beam at several miles far away, but also projecting highly clear red reference line within the maximum work distance of 25 meters. It is only projecting moderate brightness red laser light from beam aperture, unless it is pointed under high lighting, high power red laser up to 50mW to 100mW would also make clear line projection under formal lighting working occasions.
Comparing with formal glass coated lens, when line alignment is processed at quite long work distance, non Gaussian distribution beam 650nm red line laser module always gets even better performance in real use. Red reference line is available with the same brightness from middle part towards both ends, also getting no appearance of laser light decay in continuous work. When laser line generator gets selected optic lens degree from 10 degree to 93 degree. It is only a key issue to get basic learning of line length, line thickness and work distance from beam aperture onto targeting surfaces. When this red laser gets correct selection of output power and optic lens degree, it will make the most accurate line projection for any industrial line aligning result as expected.
After quite strict laser beam stability tests and aging preventing tests up to 24 hours, and quite special use of glass window in front of laser beam aperture, 650nm red line laser module obtains excellent laser light cycling use and extremely stable red reference line projection under moisture and dust working condition etc. Whenever users are making quite simple adjustment of laser beam focus, highly intense and powerful red laser light is immediately focused into super fine red line in use. Only according to high attention to powerful red laser light and any serious hurt to human eyes, after proper wearing of laser safety goggles, this industrial alignment laser achieves highly secured line projection in distance perfectly.

635nm Powell Lens Red Line Laser Module

Not any longer relying on any prior time spending on manual line printing or line drawing works, whenever users are trying to make extremely clear line alignment on different targeting surfaces, it would be quite nice experience for users to make excellent use of 635nm Powell lens red line laser module. It is an ideal line aligning solution for various industrial and high tech line alignment works. When it is keeping work with pure red laser light emission from 635nm red laser diode, after correct selection of output power and optic lens degree, it is workable with the highest level of accuracy line projection in distance effectively.

It is always taking quite long time to adopt a quite simple square meter or blocking board. However, after quite easy use of DC input power supply with correct operating voltage, 635nm red line laser module makes sure of immediate and highly clear red reference line projection in distance immediately. When it is projecting the purest red laser light and at least 3 times brighter laser light than 650nm red laser, after production into a real laser line generator, it is always keeping quite low laser beam divergence and quite small size red reference line thickness onto targeting surfaces.
According to basic design of the best quality separate crystal lens, no matter it is pointed for close distance or long distance, 635nm red line laser module is always keeping work with high uniformity red laser light emission. Red reference line is keeping the same brightness from middle part towards both ends. Especially in occasion of the most accurate line alignment at quite long work distance, it is just keeping the best line aligning result, also keeping no appearance of laser light decay or blur in continuous work. When laser line generator gets selected lens degree of 10 degree to 93 degree, red reference line is obtaining different line length within 0.5 meter to 6 meters, thus assuring quite satisfied line postponing results on multiple targeting surfaces.
Under quite strict laser beam stability tests up to 24 hours and quite easy installation with a laser alignment mounting bracket, 63nm Powell lens red line laser module enables quite easy and convenient installation and adjustment. Within the maximum installation distance of 3 meters, this alignment laser is able to be installed on any other industrial machine or device, and then generating highly clear line projection in distance. Any time users are aware of powerful red laser light and thermal energy produced from high power red laser up to 50mW to 100mW, it is only a key issue to wear laser safety goggles and avoid eye exposure until achieving easy and safe alignment constantly.

100mW Red Line Laser Module within 10-110 Degree Lens

Whenever users are trying to make highly clear line alignment at much longer work distance than formal hand reaching, not just limited with hand reaching, it would become quite easy job for users to select high power 100mW red line laser module. Whatever kind of working surface it is pointed, it is always keeping work with moderate brightness red laser light emission from beam aperture. Whenever this line laser alignment tool gets excellent use of high quality optic lens and constant electric power source from DC input power supply, it is always workable with extremely stable and reliable red reference line projection in distance clearly.

On basis of quite easy and highly clear line alignment on various targeting surfaces continuously, 100mW red line laser module would have to maintain super strong industrial stabilization. It is adopting quite durable aircraft used aluminum alloy housing tube with 26mm diameter. After quite easy use of external 9V DC input power supply, it is always ensures super nice thermal conductivity and increasing stability in continuous red reference line projection works. Usually it is getting perfect protection of laser tube itself from overheating and over current functions, thus always achieving increasing stability in long time line alignment.
Whatever kind of working surface it is pointed, in order to obtain different line length and line thickness onto targeting surfaces, 100mW red line laser module allows easy choice of optic lens of glass coated lens or separate crystal lens. No matter Gaussian or non Gaussian distribution red laser beam it is pointed, this laser line generator always keeps high linear quality and extremely fine line alignment in distance. Available with different line length and line thickness from different laser beam fan angles, only after quite easy screw of adjustable cylindrical lens, red laser achieves immediate red laser light concentration and the finest red reference line projection in distance effectively.
Under basic design of APC, ACC driving circuit board, even though 100mW red line laser module is generating the most powerful red laser light and thermal energy from beam aperture, however, it is still getting perfect tube protection from increasing temperature and electric current impact. When it is keeping work within daily use of 8 to 10 hours per day, after enough time leaving for tube cooling down, the genuine red alignment laser line targeting just keeps excellent laser light cycling use and extremely stable red line projection constantly. On condition that users are paying the highest attention to laser safety issue, only after correct wearing of laser safety goggles, this industrial line laser alignment obtains no danger use constantly.

5mW 650nm Red Line Laser Module

Not any longer relying on manual line printing work with a simple square meter or blocking board, in order to make sure of highly accurate and precise line alignment on various targeting surfaces, it should be quite wonderful experience for users to have a try of 5mW 650nm red line laser module. When this class IIIa laser device gets quite easy connect with an external DC input power supply and gets enough space leaving for laser tub cooling down, this laser line generator is always workable with superior nice thermal emitting and extremely stable red reference line projection on various targeting surfaces easily and clearly.

After basic adoption of import 650nm red laser diode, not the same as a quite simple red laser pointer, after production into a practically used 5mW red line laser module, it is always getting at least 40% improvement of laser beam stability in continuous use. According to basic use of inner metal heat sink cooling system and external DC input power supply, this laser line generator always gets quite larger space leaving for laser tube cooling down and also getting increasing stability in continuous work. Under continuous red reference line projection within 8 to 10 hours per day, after enough time leaving for laser tube cooling down, it is able to work with highly stable red reference line projection and excellent laser light cycling use in continuous work.
This 5mW 650nm red line laser module is only projecting moderate brightness red laser light from beam aperture. In close distance and formal hand reaching work places, it is still getting quite serous need of highly fine and straight red reference line onto targeting surfaces. However, after giving up the use of formal plastic coated lens, this laser line generator is selecting qualified glass coated lens or separate crystal lens. It is projecting high linear quality and high fineness red reference line. After easy selection of different fan angles from 10 to 110 degree, this 5mW red laser module is achieving different line length and line thickness until achieving the most satisfied line positioning result for close distance.
According to quite easy used of laser alignment mounting bracket and specially designed electric wires extension for 5mw 650nm red line laser module and DC input power supply, it is able to work within the maximum installation distance of 3 meters. Red alignment laser line is easy to reach any vertical or horizontal surfaces, and also getting no barrier line positioning result on those of hard reaching places etc. Every time users are making quite easy adjustment of laser beam focus and laser line targeting direction, it achieves satisfied line thickness and fulfills the most accurate line positioning results for all industrial and high tech aligning works effectively.

10 -110 Degree Fan Angle 650nm Red Line Laser Module

Not any longer relying on manual line drawing or line printing works, in order to make the most precise line alignment on multiple targeting surfaces, including quite harsh environments where human hands cannot reach easily, it is always quite efficient method to make excellent use of 650nm red line laser module. It is projecting moderate brightness red laser light directly from 650nm red laser diode. When it is trying to generate highly straight and fine red reference line from beam aperture, this laser line generator should only be equipped with qualified optic lens. Under easy selection of different lens degree and output power, it is always making highly clear and accurate red reference line projection on multiple targeting surfaces efficiently.

When line alignment is processed for quite long time, not simply used for temporary line projecting work, the genuine use of 650nm red line laser module should be used with external electric power source of DC input power supply. The AC/DC adapter is accepting wide range electric current within 100V to 240V, after converting into much lower voltage of 3V or 9V DC power supply, this laser line generator is just able to project highly visible red laser beam within wide range output power of 5mW to 100mW. Either Class IIIa or Class IIIb laser device it is selected, it is always making continuous red reference line projection, but also keeping highly stable performance within daily use within 8 to 10 hours.
According to quite special use of qualified glass coated lens or separate crystal lens, either it is used within hand reaching or quite long work distance, 650nm red line laser module is always keeping work with super fine and straight red reference projection from beam aperture. When it is getting different fan angle within 0.5 meter to 6 meters, after very easy adjustment of laser beam focus, this laser line generator achieves different thickness, and then achieving quite satisfied red reference line projection within the maximum work distance of 25 meters.
Under basic use of an accessory part of any industrial machine or device, including those of quite harsh working environments it is used, 650nm red line laser module is ensuring quite convenient red reference line projection on any vertical or horizontal surface. Red alignment laser line is achieving the minimum line thickness of 0.3 meter at 10cm, and as fine as 1mm to 2mm at 2 meters distance from beam aperture to targeting surface. In any working occasion where the most powerful red laser light and thermal energy produced from beam aperture, users should avoid eye exposure to beam aperture and remember to wear laser safety goggles until achieving highly secured measurement perfectly.