April 2020 – Red Dot, Line and Cross Line Laser Modules

Qualified Glass Lens 10mW Red Line Laser Module

Not simply relying on any manual or mechanical line aligning works, whenever users are adopting qualified 10mW red line laser module and easy connect with an external DC input power supply, it is making sure of continuous red reference line projection. It is being used as an industrial stabilized laser line alignment tool. Only if it gets basic use of cooling system and qualified glass coated lens with different fan angle, it is keeping work with superior nice thermal emitting and straight red reference line projection from beam aperture. After quite easy installation and adjustment of red laser to correct position, it makes easy and quick line projection onto all working surfaces.

Designing with the best quality import 650nm red laser diode, after projection into such 10mW red line laser module, it mainly gets at least 40% improvement of laser beam stability in continuous use. It employs 650nm red laser diode as beam emitting source. When it is getting the longest developing history and the most mature laser diode tech, this laser line generator is not only getting quite low production cost, but also achieving extremely stable and reliable red reference line projection in continuous use.
According to advanced use of qualified glass coated lens with different fan angle of 10 to 110 degree, 10mW red line laser module projects different line length in use. It keeps work with high linear quality red laser line projection. Especially in occasion of special use of glass window in front of laser beam aperture, even though red laser line alignment is processing under moisture or dust, it is not affecting at all. Users should always get basic learning of line length, line fineness and work distance from beam aperture to targeting surfaces, this laser line generator would get correct use of optic lens degree until achieving the most satisfied line projection as expected.
Every time users are making quite easy screw of adjustable focus optics, 10mW red line laser module allows immediate red laser light concentration, and then converting into a highly fine red reference line in use. It is operating as an accessory part, specially designed with electric wires for both alignment laser and DC power supply, it enables easy installation and adjustment of both laser line fineness and line targeting direction, it achieves the most satisfied line projection in all occasions.

Focus Adjustable 100mW 650nm Red Dot Laser Module

If it is a quite hard job for users to make clear and accurate dot projection at quite long work distance, after continuous work on the most practically used dot measuring tool of 100mW 635nm red dot laser module, it would become easy and efficient dot measuring solution for various industrial precise device manufacturing works. When it is making excellent use of import 635nm red laser diode tech and getting basic use of inner cooling system and qualified optic lens, this red laser alignment achieves increasing stability and extremely clear red reference dot projection in continuous use.

When dot aligning work is processing for quite long time, not simply used for temporary dot positioning as a simple red laser pointer, this 100mW red dot laser module makes perfect use of thermal emitting system. It is adopting larger size tube diameter of 26mm, available with the most durable aircraft used aluminum alloy housing material and inner metal heat sink cooling system, the genuine red dot projection is achieving superior nice thermal conductivity and extremely clear and bright red dot projection within wide range operating temperature. In addition, under quite serious working occasion of mechanical moving or shocking, it is not affecting at all, but always keeping highly stable dot projection after proper installation.
In process of highly clear dot projection at great distance, 100mW red dot laser module still gets serious need of highly clear dot projection onto various targeting surfaces. The employment of qualified glass coated lens is assuring high transmittance red laser light emission. When it gets quite low laser beam divergence and special laser beam mode of TEM00, this dot laser alignment is always workable with the most compact size and good round shape red reference dot projection in use.
Whatever kind of working surface it is pointing, 100mW 650nm red dot laser module only allows easy use after the use of laser alignment mounting bracket. It enables the most convenient installation onto any industrial device, and generates the clearest red dot projection for high lighting and the maximum work distance of 25 meters. In continuous red dot projection work, under increasing temperature of alignment laser, the special use of APC, ACC driving circuit board is making efficient protection of laser tube from overheating and serious electric current impact, assuring high stability red dot projection and up to 85% beam stability in continuous use of 8 to 10 hours. When users are paying high attention to powerful laser radiation and thermal energy hurt to eyes, only after correct wearing of laser safety goggles, this red laser alignment achieves safe and quick dot measurement perfectly.

Constant Pointing 635nm DC Power Red Line Laser Module

If users are trying to make extremely clear and fine enough lien projection at great distance, instead of formal square meter, blocking board or triangular meter, it is becoming a quite efficient solution to make advanced use of 635nm red line laser module. Whenever high purity red laser light is generating from 635nm red laser diode directly, basically designed with inner cooling system and qualified optic lens with different fan angle, this laser line generator is projecting extremely bright and fine red reference line onto targeting surfaces effectively.

After advanced use of import 635nm red laser diode, available with wide range output power of 5mW to 100mW, 635nm red line laser module is projecting at least 3 times brighter red laser light than formal 650nm red laser device. At the same time, on basis of its low laser beam divergence of less than 1mard and special laser beam mode of TEM00, this laser line generator is obtaining highly fine and straight red reference line onto various targeting surfaces. In formal industrial line aligning works, within the maximum work distance of 25 meters, it is supporting work with highly clear red reference line for high lighting as well.
When line alignment is processing with high level of accuracy, 635nm red line laser module is requiring to generate extremely fine and straight line onto targeting surfaces. The advanced selection of qualified glass coated lens or separate crystal lens has just made laser line generator different from any formal plastic coated lens device. It projects high linear quality and high straightness red reference line. Within wide range fan angle of 10 to 110 degree, only if laser line generator gets basic learning of line length, line thickness and work distance, it gets correct selection of optic lens degree so as to assure no mistake line projection in distance.
After quite easy adjustment of laser beam focus, 635nm red line laser module enables immediate red laser light focusing and extremely fine red line projection onto targeting surfaces. It allows quite easy installation onto any industrial machine or device, with the assistance of laser alignment mounting bracket, alignment laser allows easy adjustment of laser line targeting direction within three dimensions, and then achieving no mistake line projection at great distance effectively. When users are making line alignment with high power red laser up to 50mW to 100mW, besides its high attention to powerful laser light and thermal energy, users should also wear correct laser safety goggles until achieving extremely fine and safe alignment perfectly.

Increasing Stability 100mW Gaussian Beam Red Line Laser Module

Not always relying on any manual or mechanical line aligning works, in order to make quite satisfied line projection at quite long work distance, it is just substituting by advanced laser tech applying 100mW red line laser module. It is not only making advanced use of 650nm red laser diode tech, basically equipped with inner qualified glass coated lens with different fan angle, this laser line generator is projecting highly straight and fine enough red reference line projection in use. Only after its easy installation and adjustment of both beam focus and line targeting direction, it makes the most satisfied line projection at great distance effectively.

The usual use of 100mW red line laser module is continuing for quite long time, but not simply used as a simple red laser pointer. After special use of an external DC input power supply, accepting wide range electric current within 100V to 240V, it is keeping work with continuous red reference line projection. In continuous red laser line alignment work, under increasing temperature, this laser line generator still gets perfect protection from overheating and over current in continuous use. At the same time, the special use of electric wires extension also enables freely installed distance of 3 meters, which would make the most satisfied line projection onto any vertical or horizontal surface conveniently.
After advanced use of glass coated lens and quite strict laser beam stability tests up to 24 hours, 100mW red line laser module just keeps work with high linear quality red reference line projection. In constant line projection within 8 to 10 hours per day, after enough time leaving for tube cooling down, it is just able to work with excellent laser light cycling use and extremely clear red line projection in long time use. Although it is projecting formal Gaussian beam from beam aperture, however, it is enough to fulfill moderate accuracy red line projection as expected.
Whatever kind of working surface it is pointing, 100mW red line laser module is not only making highly clear line projection at great distance, but also projecting serious thermal energy and increasing temperature in use. The special use of APC, ACC driving circuit board prevents alignment laser from overheating and over current, always obtains up to 85% beam stability in continuous use. Whenever users are making constant line projection for all industrial line measuring works, in order to avoid hurt to human eyes, users should always wear correct 650nm wavelength preventing laser safety goggles and adjust red line targeting direction so as to achieve no mistake and no track line alignment constantly.

Constant Projecting Glass Lens 650nm Red Dot Laser Module

Whenever users are trying to make quite easy and efficient dot alignment at various working distances, it is not an easy job to make simple use of a laser pointer. On contrary, after constant work on the most practically used device of 650nm red dot laser module, after simple equipment with an external DC input power supply, it makes continuous red reference dot projection on various targeting surfaces. In any occasion that this dot laser alignment tool allows easy installation and adjustment to correct position, it makes high precision dot projection in all occasions effectively.

In any occasion where users are making continuous dot projection, 650nm red dot laser module should be made with super nice thermal emitting. The special use of inner metal heat sink cooling system and APC, ACC driving circuit board are forming into excellent thermal emitting, and achieving extremely stable and reliable red reference dot projection in continuous use. In formal red dot projection, within daily constant red laser dot alignment within 8 to 10 hours, it is maintaining excellent laser light cycling use and extremely stable red dot projection in continuous use.
This glass coated lens 650nm red dot laser module allows wide range output power of 5mW to 100mW. It selects different size tube diameter of 16mm and 26mm. The selection of durable aircraft used aluminum alloy housing tube ensures excellent thermal conductivity. In addition, within wide range operating temperature of -10 degree to 45 degree Celsius, red laser alignments always keeps highly bright red laser beam emission and highly clear red reference dot projection under formal lighting and long distance within 25 meters. When this compact structure red laser gets easy installation onto industrial machine or device, it makes sure of highly stable dot projection under any mechanical moving or shocking etc.
With the assistance of laser alignment mounting bracket and specially designed electric wires extension for both 650nm red dot laser module and DC input power supply, it allowing quite easy dot targeting within three dimensions. Even though it is projecting serious electric current and overheating, however, these alignment lasers just maintains good laser light cycling use and extremely clear red reference dot projection in continuous use. Under occasion that highly powerful red laser light is generating from high power red laser up to 50mW to 100mW, it is only a necessity to avoid eye exposure to laser beam aperture and remember to wear laser safety goggles until achieving highly secured and easy measurement effectively.

Different Fan Angles 5mW 650nm Red Line Laser Module

In any type of industrial line aligning works, after special need of highly accurate and fine enough line projection onto desired working surfaces, none of manual or mechanical line aligning tool can be comparable with advanced laser diode tech applying 5mW 650nm red line laser module. It projects moderate brightness red laser beam directly from 650nm red laser diode. When it gets basic use of inner cooling system and constant electric power source from DC input power supply, this industrial stabilized laser line generator makes highly stable and reliable red line projection in continuous work effectively.

In formal textile garment processing work fields, 5mW 650nm red line laser module is a quite nice accessory part. It is helping a lot of factory workers for line cutting and line positioning onto various garment cloths. It selects external DC input power supply as its electric power source. Accepting wide range electric current within 100V to 240V, after efficient converting into lower operating voltage of 5V 1000mA DC power supply, 650nm red laser module just keeps work with continuous red reference line projection, but also keeping highly reliable performance and good protection from overheating and over current in continuous use.
After basic adoption of qualified glass coated lens or separate crystal lens, 5mW 650nm red line laser module allows easy selection of fan angle from 10 degree to 110 degree. It is projecting high linear quality red reference line projection from beam aperture. Within quite close distance of 2 meters, it is able to project extremely long line length of about 6 meters after the selection of larger lens degree of 110 degree. It is a necessity to get basic learning of line length, line thickness and work distance, only if it gets correct selection of fan angle, this laser line generator will get high precision line projection as expected.
No matter what kind of working surface it is pointing, including those of quite hard reaching places, 5mW red line laser module makes quite easy and convenient use after the assistance of laser alignment mounting bracket. Red alignment laser line is easy to reach any targeting surface. At the same time, when users are making easy roast of adjustable focus optic, it ensures immediate red laser light concentration and highly clear red line projection in continuous use. Whatever kind of working surface it is pointing, only if it is installing correctly on desired machine or equipment, within freely installed distance of 3 meters, this red laser line generator makes no track and no barrier line projection perfectly.