635nm red laser diode module – Red Dot, Line and Cross Line Laser Modules

Major Introduction of 635nm Red Laser Diode Module In Industrial Field Use

Whenever users are trying to make ultra clear and precise dot indication for various industrial mechanical processing works, not limited by long distance, high height and other complex working environments etc, it would be the best chance for engineers or factory workers to operate a high purity and high brightness light emitted tool of a 635nm red laser diode module. It gets featured advantages of clear red dot emission, low laser beam divergence, good collimation. Any time it makes correct use of output power and operating voltage electric power source supply, this red dot laser is able to make highly clear red dot positioning onto desired working surfaces. Comparing with traditional dot measuring works, it can greatly reduce the error and loss in the production process.
Usually 635nm red laser diode module adopts the original import 635nm red laser diode within 5mW to 100mW and high power range of 150mW to 500mW, with the intelligent feedback control circuit board in type of APC, ACC. Cooperated with an inner metal heat sink cooling system, whatever output power it is selected, it is working well with high efficiency transmission optical system which has the characteristics of low power consumption and high-efficiency optical power output, good consistency, long service life, and can work stably for a long time in an industrial environment. This 635nm red dot laser alignment tool gets no effect by increasing temperature and serious electric current impact, and enables long time lasting red dot indication for multiple raw material processing works.
When 635nm red laser diode module gets proper connects with 5V, 9V, 12V 1000mA DC power supply, it begins to work with continuous red laser beam emission intensely. In addition, if users are getting special use of continuous laser light source emission, it can also be designed with inner battery power source supply. When it makes constant red reference dot projection within daily operating time of 8 to 10 hours per day, it can reach up to 85% laser beam stability and highly clear red dot indication for multiple raw material processing works conveniently. It is always easy to install and disassemble, and can be quickly deployed and used in a variety of scenarios.
Owing to its special design of thermal emitting and durable housing tube design, the real use of a 635nm red laser diode module gets strong industrial applicability, which can work in a variety of environments, can adjust the brightness, adapt to different material surfaces and ambient light, and can also play a certain protective role for human eyes. When it is installed in various equipment, it does not take too much space, and is conducive to the compact design of equipment. After correct use of output power and proper integration to correct position, it can bring users a lot of convenience for those of industrial fields as below:
Laser processing equipment positioning: 635nm red laser diode module is commonly used in laser marking machines, laser welding machines, laser engraving machines and other equipment to provide accurate position indication for processing, so that marking, welding, engraving and other operations can be carried out according to the predetermined position, improving processing accuracy and quality.
Machine tool processing assistance: ultra compact structure made red dot laser can be installed on the machine tool to help operators quickly and accurately determine the processing position and size of the workpiece, assist in operations such as tool setting, reduce debugging time, and improve processing efficiency.
Four-wheel alignment: in the four-wheel alignment instrument in the automobile maintenance industry, red alignment laser is used to indicate the position and angle of the wheel, helping technicians to adjust the wheel alignment parameters more accurately and ensure the driving performance of the vehicle.
Clothing processing marking: red laser light source can be used for clothing button point light source positioning, cloth cutting auxiliary marking, sewing machine auxiliary marking positioning, etc., to help workers more accurately perform cutting and sewing operations, and improve the accuracy and efficiency of clothing production.

General Applications of 635nm Red Laser Diode Module for Multiple Fields

Unlike the use of any prior dot positioning work, not any longer limited by long distance, long time or other hard reaching places use, none of manual or mechanical dot projecting tool can be comparable with a high density beam emitted tool of a 635nm red laser diode module. It applies a formally available 635nm wavelength red laser diode among visible red laser light band, the human eye is sensitive to this wavelength, the red dot is clear and easy to see, and it is suitable for short distance dot indication. On condition that red dot laser gets constant electric power source supply and proper integration with those of industrial machine or device, it brings users quite easy reaching, good direction and ultra clear red reference dot projection onto different working surfaces conveniently.
When 635nm red laser diode module gets low laser beam divergence of less than 1mrad and special Tem00 laser beam mode, it always projects ultra compact size and highly bright red reference dot onto different working surfaces. For instance, it gets only 0.3mm dot diameter at 10cm, and 1mm to 2mm dot diameter at 2 meters work distance. In addition, employed by an import 635nm red laser diode within 5mW to 100mW, and high power up to 150mW to 500mW, this dot laser alignment is applying different dimension metal housing tube design, thus there is always larger space leaving for tube cooling down and heat dissipation. In those of long time lasting red laser dot projection within 8 to 10 hours per day, it enables highly stable red dot projection and ultra high laser light cycling use in continuous use.
After configuration with a 16mm, 18.9mm and 26mm diameter anodized aluminum alloy housing tube, this ultra compact size tube made 635nm red laser diode module enables quite easy installation, quick reaching and no barrier red dot indication onto any vertical or horizontal surface. It has high integration and is easy to embed into small devices, such as laser pens and scanners. Owing to its its low energy consumption and low relying on manual labor force input, according to correct use of output power and operating voltage electric power source supply, this direct diode emission made 635nm red dot laser alignment tool just brings users ultra clear and precise dot alignment for multiple lighting occasions effectively.
Applications:
Industrial field: highly precise dot indicating tool of a 635nm red laser diode module is used for laser positioning, such as machine tool processing, position calibration of cutting equipment,, laser marking (production line alignment), using the visibility of red dots to improve operation accuracy.
Consumer electronics: ultra compact size tube made red dot laser is commonly used in laser pens, projection keyboards, or as indicator lights for electronic devices (such as projectors, barcode scanners).
Medical and scientific research: low-power red alignment laser can be used for optical experiments, biological cell observation (auxiliary positioning), and some medical equipment (such as skin treatment instruments) also use its visible light indication function.
Security and measurement: laser sights (toys or simulation equipment), distance meters (marking target points with red dots).

Highly Stable 5mW to 100mW Pro Red Dot Laser Alignment

What would you like to do to make clear and accurate enough dot projection? Even though it is full of challenge to get ideal accuracy as expected, however, not able to rely on any manual labor force input, it becomes a much better job for users to operate a pure light emitting tool of a pro red dot laser alignment. It applies advanced 635nm red laser diode tech and a qualified glass coated lens, configured with different dimension and durable metal housing tube, this direct diode emission made 635nm red laser module just enables quite easy installation, quick reaching and highly precise red reference dot projection onto a lot of working surfaces constantly.
The genuine dot measuring work with a pro red dot laser alignment always has to maintain a quite long time, thus it should have to maintain even more stable and reliable dot projection than a simple red laser pointer. It is applying an import 635nm red laser diode within 5mW to 100W as its beam emitting source. Commonly it is equipped with a metal heat sink cooling system inside an anodized aluminum alloy housing tube, the real use of a 635nm red laser diode module just bears wide range operating temperature, and maintains ultra stable and reliable red dot projection for multiple working environments.
When pro red dot laser alignment applies an import 635nm red laser diode within 5mW to 100mW as its beam emitting source, in order to assure its clear and accurate dot measurement at different work distances, it just applies a qualified glass coated lens in front of laser beam aperture. It is performing well with high density and high transmittance red laser light emission at long extending distance. At the same time, unless it is pointing under sunlight, within quite long work distance, this 635nm red laser diode module still maintains clear and accurate dot projection for multiple industrial and high tech precise dot measuring works.
It is bearing any harsh occasion of moisture or dust, once it is mounting properly onto those of industrial machine or device, this pro red dot laser alignment always makes a no mistake, no barrier and no track dot measurement for a lot of raw material processing works. The unique use of adjustable focus optic lens just enables immediate red laser light source emission and efficient conversion of increasing brightness and accuracy red dot projection at longer distance. Once users are paying high attention to thermal energy hurt to eyes and wearing proper laser safety goggles, this red alignment laser still brings users easy and secured use for all working occasions effectively.

How Can Adjustable Focus Lens 635nm Red Laser Diode Module Work Conveniently?

Whatever kind of working surface users are in need of ultra clear and quick dot measurement, any type of manual or mechanical dot alignment tool can be comparable with a 635nm red laser diode module. It is applying an import 635nm red laser diode as its beam emitting source. In those of long lasting and long distance precise dot measuring work fields, only if it gets proper installation and adjustment of both of laser beam focus and dot emitting direction, this dot laser alignment tool gets highly focused red laser light source, increasing brightness and accuracy dot generation at great distance effectively.
When 635nm red laser diode module is made with good thermal emitting system, even though it is used for quite long time and long distance, it still maintains good laser beam stability and strong environmental stabilization. Being made with an import 635nm red laser diode within 5mW to 100mW, after special use of 16mm and 26mm diameter anodized aluminum alloy housing tube, this direct diode emission made 635nm red dot laser just gets superior thermal stabilization within wide range operating temperature, and any other harsh occasion of mechanical moving, shocking or calibration etc.
Cooperating with a qualified glass coated lens, whatever kind of working surface it is pointing, this 635nm red laser diode module is working well with high density and high transmittance red laser light source emission at long extending distance. The unique use of a glass widow is also equipped in front of laser beam aperture. Whenever it is used under moisture, dust, rain, water or fog, this red dot laser still keeps work with good performance. It is able to bring users quite satisfied dot alignment solution for laser marking, laser engraving, drilling system, red laser sight, military targeting and lab experiment work etc.
On the basis of real work distance and lighting occasion, within wide range output power of 5mW to 100mW, this 635nm red laser diode module enables correct use of output power, and ultra precise red dot projection within the greatest work distance of 25 meters. Being made with 16mm and 26mm diameter housing tube, it always enables quite easy installation and no barrier red dot projection onto any vertical or horizontal surface. This red alignment laser should only be used with high attention to laser safety issue and proper wearing of laser safety goggles, it brings users the best dot alignment experience for all working occasions effectively.

How does DC power 635nm red laser diode module work continuously?

On the basis of constant technical innovation of a 635nm red laser diode tech, it is not simply made into a red laser pointer, but being made into a much more practically used device of a 635nm red laser diode module. On condition that it gets basic use of thermal stabilization design and constant power source supply, whatever kind of working surface it is pointing, it just enables correct use of output power and proper installation onto any other industrial machine or device. Without any serious relying on any manual labor force input, within the lowest time consumption and the lowest production cost, this direct diode emission made dot laser alignment tool has just provides users excellent dot aligning solution for all precise machinery processing works constantly.

The genuine use of 635nm red laser diode module is required to make constant dot indication. It is operating easy and conveniently as an assessor part of any other industrial machine or device. It is applying an import 635nm red laser diode within 5mW to 10mW as beam emitting source. Together with a metal heat sink cooling system inside a highly durable anodized aluminum alloy housing tube, in practical precise dot aligning work, this 635nm red dot laser is obtaining superior nice thermal emitting and thermal conductivity. Once it is operating within wide range operating temperature and other harsh working occasion of mechanical moving or calibration, it still gets perfect protection of itself and maintains highly reliable red dot indication within long lasting work time of 10 hours.
According to easy connects with an AC/DC adapter, comparing with a simple alkaline battery power source made laser pointer, the genuine use of a 635nm red laser diode module just makes sure of constant red laser beam and red dot indication from laser beam aperture. It is not limited by long distance, high height or other hard reaching places etc. According to real work distance and lighting occasion, only after its correct use of output power, this direct diode emission made red dot laser has just provided users excellent red laser light source solution for laser marking, laser engraving, drilling system, military targeting and high tech work etc.
Together with electric wires for both 635nm red laser diode module and DC power supply, it always enables the maximum installed distance of 3 meters, and the easiest reaching of red dot indication onto any raw material surface. It brings users no mistake and long lasting dot indication as long as 25 meters and high lighting working occasions etc. Once this red alignment laser makes proper adjustment of both laser beam focus and laser dot emitting direction, it gets highly concentrated red laser light emission and increasing accuracy red dot alignment in continuous use. After high attention to thermal energy hurt to eyes and wearing correct laser safety goggles, it just assures easy and secured dot measurement in long lasting use.