cross line laser module – Page 2 – Red Dot, Line and Cross Line Laser Modules

APC Driving Circuit 650nm Red Cross Line Laser Module

If users are looking for a quite efficient cross line alignment, no matter it is processing at close distance or long distance, it might be full of challenge before selecting a quite professional device. At the same time, after making perfect integration with import 650nm red laser diode, glass coated lens and inner cooling system, it is a great technical innovation to develop a quite practically used device of 650nm red cross line laser module. It projects moderate brightness red laser beam directly from inner laser diode, after correct mounting onto desired machine or device, it makes sure of high precision and high speed red cross line source generation at various work distances effectively.

Comparing with any simple red laser pointer only used for temporary dot positioning work, this 650nm red cross line laser module is always workable with continuous cross line projection, while still have to work with good laser beam stability. It employs import 650nm red laser diode within 5mW to 100mW, which is always working with at least 40% improvement of beam stability in use. This cross laser alignment gets basic use of inner metal heat sink cooling system inside high duration metal housing tube. When it is keeping work within 8 to 10 hours per day, after proper use by skilled used or professionals, it is maintaining excellent laser light cycling use and long lifetime of more than 8,000 hours.
Available with APC, ACC driving circuit board, 635nm red cross line laser module is workable with constant output power and electric current supply. Especially in occasion of high power red laser is operating, under increasing temperature, the intelligent feedback system is making perfect protection of any possibility of tube burning out or damage. In formal red cross line projection, users can make quite easy screw of adjustable focus optic lens. The most concentrated red laser beam is converting into extremely fine and quick cross line alignment at all work distances.
Any time 635nm red cross line laser module gets freely selected fan angles of 10, 15 and 110 degree, it generates high linear quality and different dimension cross line source in use. Usually it is passing through basic measurement and experiment, only if it gets correct output power and fan angles, this alignment laser would make quite satisfied cross line measurement within the maximum work distance of 25 meters and other formal lighting occasions. When high power red cross laser is selecting to make long distance measurement, it is a key issue to wear correct laser safety goggles until achieving secured and free use permanently.

Efficient Aligned 50mW Red Cross Line Laser Module

When users are trying to make quite easy cross line projection at quite long work distance, not simply relying on any manual or mechanical cross line measuring device, it is a quite efficient solution to make use of a 50mW red cross line laser module. It is not able to avoid mistake caused by manual operation. The operation of advanced 650nm red laser diode tech is helping a lot to make clear enough cross line projection at quite long work distance. After quite easy installation and adjustment of laser beam focus and cross line targeting direction, this cross laser alignment tool achieves high level of accuracy measurement in distance efficiently.

The projecting beam of 50mW red cross line laser module is not as bright as popular used green laser device. When it is projecting moderate brightness red laser light from 650nm red laser diode, this direct diode laser device is workable for all formal lighting working occasions. For the most important of all, when it gets mass production and the longest developing history, it gets quite low production cost and highly stable two perpendicular lines with accurate 90 degrees easily. After easy connect with an external DC input power supply and continuous cross line projection within 8 to 10 hours per days, this red cross laser maintains high beam stability and long lifetime in proper use.
On basis of the best use of qualified glass coated lens with different fan angle of 10, 15 and 110 degree, 50mW red cross line laser module is applying for majority application fields. In a lot of industrial precise device manufacturing work fields, on basis of different cross line length within 0.5 meter to 6 meters, this cross laser alignment tool should only get correct optic lens, which will achieve quite satisfied measuring result at long distance. In order to avoid laser light decay or blur in multiple working occasion, after special use of glass window in front of laser beam aperture, it is keeping stable performance under any moisture or dust working occasion etc.
Whatever kind of working surface it is pointing, in process of the most accurate cross line projection in distance, 50mW red cross laser alignment enables easy adjustment of laser beam focus. It enables quite easy adjustment of cross line thickness and targeting direction, within the maximum operating distance of 25 meters, this alignment laser achieves quite satisfied measuring result on various surfaces. The special use of APC, ACC driving circuit board is preventing any increasing temperature and serious electric current impact. Usually within the maximum daily use of 8 to 10 hours, and freely installed distance of 3 meters, this industrial cross line laser module achieves high accuracy measurement constantly.

635nm Red Cross Line Laser with Glass Coated Lens

Under special requirement of highly clear and accurate cross line alignment under quite long work distance and high lighting working environments, it is not an easy job for users before selecting a quite professional laser device as expected. Not the same as a temporary positioning tool of red laser pointer, it is just a quite special experience for users to adopt 635nm red cross line laser. When it is generating high purity and high brightness red laser light from 635nm red laser diode, under operation with quite low laser beam divergence and quite high quality glass coated lens, this cross laser alignment tool is generating the most accurate and the finest red vertical or horizontal lines generation with accurate 90 degrees in distance efficiently.

This 635nm red cross line laser is available with import red laser diode as its beam emitting source, which is getting at least 40% improvement of laser beam stability in continuous work. Under quite long time cross line alignment on various targeting surfaces, this cross laser module is also being made with inner metal heat sink cooling system, after perfect configuration with quite durable aircraft used aluminum alloy housing tube, it is just achieving excellent thermal conductivity and the most stable red vertical and horizontal lines generation with accurate 90 degrees in distance immediately.
Whenever 635nm red cross line laser gets freely selected optic lens degree of 10, 15 and 110 degree, it is generating different cross line length and thickness in use. It is a quite practically used and industrial stabilized cross line aligning tool. When it is selecting quite high quality glass coated lens, not the same as a formal plastic coated lens, it is keeping quite high linear quality and high straightness red cross line source projection in use. Under condition that 635nm cross laser module is achieving different cross line length within 0.5 meter to 6 meters, after proper selection of optic lens degree, it achieves the most satisfied measuring result for laser alignment for screen printing system, heat transfer machine, laser medical therapy and high tech works etc.
Under easy use of laser alignment mounting bracket, even though some of working place is not easy to reach, 635nm red cross line laser module is still allowing quite convenient installation. After freely installed distance of 0.3 meter to 3 meters, it is properly installed and then making quite convenient two perpendicular lines within the maximum distance of 25 meters. under quite nice use of APC, ACC driving circuit board, even though this alignment laser is selected with high power up to 50mW to 100mW, it is keeping constant power and electric current supply, and generating the most stable red cross line laser source projection. Only after correct wearing of laser safety goggles and avoiding eye exposure, this industrial red cross laser assures free and safe alignment perfectly.

What is The Most Accurate Red Cross Line Laser Module

What is your solution to make extremely clear and accurate cross line alignment in distance? Without the use of formal cross line printing device, such as formal manual or mechanical cross line aligning devices, it would be quite efficient solution for users to adopt red cross line laser module. It is projecting direct and quick red laser beam emission from inner 650nm red laser diode, after production with inner cooling system and continuous electric power source from DC input power supply, this red cross laser is just workable with highly clear and stable performance for all precise device manufacturing works effectively.

It should have to spend quite long time for prior manual cross line drawing work with a simple triangular meter, blocking board or square meter. However, it is far more enough to get ideal cross line alignment for quite long time and quite long work distance etc. When users are getting serious accurate and rapid measurement on various targeting surfaces, red cross line laser module is bringing users totally different experience in continuous use. When it is getting continuous electric power source of DC input power supply, supported by 3V or 9V operating voltage, this cross laser alignment tool makes sure of continuous red vertical and horizontal lines projection in distance easily.
The genuine cross line alignment with red cross line laser module would be processed for quite long time, thus it would have to be made with high level of laser beam stability in continuous work. It is adopting durable aircraft used aluminum alloy housing tube and inner cooper made red laser diode core part, cooperated with inner metal heat sink cooling system, this cross laser alignment tool achieves excellent thermal conductivity. In addition, under quite low or high temperature, it is still generating highly bright red cross line source in use. Under occasion that red cross laser is properly installed, within freely installed distance of 0.3 meter to 3 meters, it is making quite convenient two perpendicular lines generation with accurate 90 degrees.
Under freely selected optic lens degree of 10, 15 and 110 degree, under multiple application fields, red cross line laser module generates different dimension cross line source in use. Within obtained cross line length of 0.5 meter to 6 meters, under proper screw of adjustable cylindrical lens, this alignment laser gets high speed concentration of red laser light emission and super fine thickness red cross line source emission in use. Under quite professional wearing of laser safety goggles and avoiding eye exposure to powerful red light and thermal energy, this cross laser alignment tool achieves easy and free measurement perfectly.

Freely Adjusted 650nm Red Cross Line Laser Module

Under condition that users are trying to make continuous cross line alignment, formal manual cross line drawing device is not helpful at all. When laser tech engineer is developing quite practically used measuring device, such as a 650nm red cross line laser module, equipped with the most qualified glass coated lens, it is keeping work with quite accurate 90 degrees two perpendicular lines generation in distance effectively.

Whenever it is getting freely selected optic lens degree and output power, it would always make sure of easy and rapid cross line alignment constantly.
This 650nm red cross line laser module gets excellently used glass coated lens. It is always used for continuous cross line alignment work, it is also passing through quite strict beam stability test up to 24 hours. In process of quite long term or quite long distance aligning work, this cross laser alignment tool is generating high linear quality red cross line source. Selected from 10, 15 and 110 degree optic lens degree, it is achieving different cross line length within 0.5 meter to 6 meters. If users are not quite familiar with laser device selection, it is just necessary for laser users to make enough communication with laser tech engineer. According to desired line length, line thickness and work distance from laser beam aperture, red cross laser is just recommended with correct output power and optic lens degree.
This 650nm red cross line laser module gets easy installation under the assistance of laser alignment mounting bracket. It is selected external electric power source of DC input power supply. Supported by extending electric wires for both red laser and DC input power supply, usually within the freely installed distance of 0.3 meter to 3 meters, it is allowing quite easy installation and adjustment, also getting quite satisfied red cross line projection stably under high temperature and strong corrosion etc. Noncontact red cross line targeting also leaves no track on raw material surfaces and ensures no mistake cross line alignment as expected.
In continuous cross line generation work, whatever kind of output power it is selected, 650nm red cross line laser module gets rapid tube temperature increasing in constant cross line aligning work. However, the inner design part of APC, ACC driving circuit board ensures constant electric power supply and efficient preventing of electric current impacting. It is allowing operation within 8 to 10 hours, revering enough time for laser tube cooling down, this alignment laser would just maintain excellent laser light cycling use and long serving lifetime. Only according to basic laser safety issue and proper wearing of laser safety goggles, high power red cross laser would also assure easy and safe measurement constantly.