If users are not able to make clear and fine enough cross line projection at different work distances, it is not realistic to only adopt manual labor force input or other mechanical cross line measuring device. As a result, on the basis of advanced 635nm red laser diode tech and a qualified glass coated lens inside a durable metal housing tube, it is created into a quite practically used device of a Pro red cross laser alignment. It enables quite easy installation onto those of machine or device, after its correct use of output power and proper adjustment of laser beam focus, this cross line laser module brings users quite easy reaching, good direction and highly precise vertical and horizontal lines generation at long extending distance effectively.
The real use of a pro red cross laser alignment enables constant red laser beam and red cross line projection from beam aperture. It applies an import 635nm red laser diode within 5mW to 100mW as its beam emitting source, equipped with a metal heat sink cooling system, this direct diode emission made laser device gets superior nice laser beam stability of at least 40%, and highly stable red cross line source emission within long lasting work time of 8 to 10 hours per day. For the most important of all, when red cross line laser module gets proper use by skilled users or professionals, after obeying basic laser safety measures, it just enables clear and no decay light cross line projection in proper use.
The primary use of a qualified glass coated lens and a glass window are configured with a durable anodized aluminum alloy housing tube, this Pro red cross laser alignment enables high transmittance and high density red laser light emission at long extending distance. Owing to its low laser beam divergence of less than 1mrad and special Tem00 laser beam mode, thus it gets only 0.3mm fineness at 10cm, and 1mm to 2mm at 2 meters work distance. Once red cross line laser module gets correct use of output power and proper installation, it brings users good direction and highly precise cross line measurement for various industrial and high tech fields continuously.
When pro red cross laser alignment applies APC, ACC driving circuit board, within wide range output power of 5mW to 100mW, it is able to work with ultra clear and fine cross line source generation within the longest work distance of 25 meters and multiple lighting occasion as well. It enables long lasting measurement and long serving lifetime in proper use. Any time it makes freely adjusted laser beam focus and cross line projecting direction, this alignment laser enables high efficiency and high precision cross line projection at greater distance. Only if users are taking active laser safety measures and wearing correct laser safety goggles, it brings users highly fine and secured measurement in all occasions constantly.
Category: red cross line laser
Easy Use of Economy Red Cross Laser Alignment
Whatever kind of working surface users are getting serious need of highly clear and accurate cross line projection, even though it is far more enough than formal hand reaching, it should be a quite nice solution for users to operate a high density beam emitting tool of an economy red cross laser alignment. It is working well with highly straight and fine red cross line projection at long extending distance. In a lot of industrial and high tech precise cross line projection work, without serious relying on any manual labor force input, a correct output power made 650nm red laser module brings users quite easy reaching, highly stable and reliable cross line generation for a lot of raw material processing works constantly.
When economy red cross laser alignment is used for those of industrial and high tech work fields. It is applying an import 650nm red laser diode within 5mW to 100mW as its beam emitting source. Owing to its basic use of a metal heat sink cooling system inside a durable anodized aluminum alloy housing tube, it is always working well within wide range operating temperature and any other harsh working occasion etc. This red cross line laser is bearing harsh occasion of mechanical moving or shocking, and also assuring highly stable cross line generation as long as 8 to 10 hours per day.
Cooperating with a qualified glass coated lens, in order to avoid laser light decay or blur, this economy red cross laser alignment also passes through a series of strict laser beam stability test and aging preventing test up to 24 hours before it is flowing into laser market. It is working well with ultra clear and fine red vertical and horizontal lines generation within long extending distance and other formal lighting working occasions etc. When cross line laser module is selected with correct output power, it is able to make high precision cross line indication for laser alignment for screen printing system, laser medical therapy, optical instrument, military targeting and lab experiment work etc.
Being made with 16mm and 26mm diameter housing tube, within freely installed distance of 3 meters, this economy red cross laser alignment enables quite easy installation and no barrier cross line projection onto multiple working surfaces. It is working well as an accessory part of other industrial device or equipment. In a lot of industrial and high tech precise device manufacturing work fields, only if users are aware of powerful laser radiation and potential thermal energy hurt to eyes, after proper wearing of laser safety goggles, this red alignment laser still brings users easy and secured use for all working occasions.
Highly Precise Use of DC Power 650nm Red Cross Line Laser Module
Whenever cross line alignment work is processing at long extending distance, it is far more enough to reach with any prior cross line measuring work at all. At the same time, on the basis of constant technical innovation of a 650nm red laser diode tech and a qualified glass coated lens with different fan angles, it is developing into a quite practically used device of a 650nm red cross line laser module. It is performing well with ultra clear and fine red cross line projection at long extending distance. Any time this ultra compact size tube made laser device gets proper installation and adjustment to correct position, it brings users low price, long lasting and high stability cross line generation for a lot of application fields effectively.
The usual use of a 650nm red cross line laser module is in need to make long lasting cross line alignment onto different working surfaces, thus it has to maintain its stable and reliable cross line projection in long lasting use. Being made with an import 650nm red laser diode within 5mW to 100mW, even though it projects similar red laser beam as a red laser pointer, however, it is getting higher attention to its thermal emitting design. The inner part of a metal heat sink cooling system is perfectly configured with a high duration anodized aluminum alloy housing tube. As a result, any time this cross laser alignment is making long lasting cross line alignment within 10 hours, it still maintains high level of laser light cycling use and highly reliable cross line generation in proper use.
On the basis of a qualified glass coated lens with different fan angles of 10, 15 and 110 degree, in a large variety of industrial and high tech precise cross line measuring works, this 650nm red cross line laser module is projecting different dimension and high precision two perpendicular red lines with accurate 90 degrees. In process of long lasting cross line alignment work, in order to maintain its long lasting cross line alignment, this cross laser alignment tool has just passed through a series of strict laser beam stability and aging preventing test before its flowing into laser market. On condition that it makes continuous red cross line projection by skilled users, it still maintains highly reliable cross line projection for labs, institutes and colleges etc.
According to the special use of laser alignment mounting bracket and special use of electric wires extension, within freely installed distance of 3 meters, this 650nm red cross line laser module enables easy reaching and no barrier cross line generation in a lot of application fields. It enables long lasting cross line projection and reduced possibility of tube burning out or damage. Whenever this red alignment laser gets proper installation, after high attention to thermal energy hurt to eyes and correct wearing of laser safety goggles, it brings users easy and secured cross line measurement for all working occasions effectively.
Glass Coated Lens 650nm Red Cross Line Laser Module
In process of highly clear and fine enough cross line alignment at various work distances, it is far more enough to reach with any manual or mechanical cross line drawing work at all. The genuine use of 650nm red cross line laser module is always projecting highly visible and bright red laser light at several miles far away. In practical precise cross line alignment work, owing to advanced use of qualified glass coated lens with different fan angles and constant power source supply, not simply relying on any manual labor force input, it assures the lowest price, the most stable and reliable red vertical and horizontal lines generation onto various working surfaces constantly.
Being made with high duration anodized aluminum alloy housing tube, within wide range operating temperature of -10 to 45 degree Celsius, 650nm red cross line laser module is applicable for various working environments. Even though it is making cross line alignment under harsh occasion, such as mechanical moving or shocking etc, it still gets no effect at all and maintains highly stable and reliable cross line generation in long lasting use. Cooperating with a metal heat sink cooling system inside different dimension metal housing tube, after getting superior nice thermal emitting and thermal conductivity, this cross laser alignment still makes sure of highly reliable performance and highly clear red cross line generation in long lasting use.
Whatever kind of working surface it is pointing, on basis of the use of qualified glass coated lens within different fan angles of 10, 15 and 110 degree, this 650nm red cross line laser module is working well with high linear quality and highly straight red cross line source. It projects different cross line lengths of 0.5meter to 6 meters. On basis of basic measurement and experiment of cross line length, fineness and work distance, after correct use of output power and glass coated lens degree, this red cross laser makes sure of high precision cross line measurement for both industrial and high tech precise cross line measuring fields effectively.
Available with different dimension metal housing tube design, together with electric wires for both 650nm red cross line laser module and DC power supply, it always allows convenient installation and quick reaching of red cross line source indication in continuous use. It is a necessity to mount it onto desired machine or device, after its freely adjusted laser beam focus and cross line projecting direction, this alignment laser gets high intensity red laser light and increasing accuracy cross line measurement in distance. According to high attention to laser safety issue and correct wearing of laser safety goggles, without eye exposure to beam aperture, it achieves easy and secured use in long lasting use.
Adjusted Fineness Glass Coated Lens 5mW 10mW 20mW 50mW 100mW 660nm Red Cross Line Laser Modules
Whenever cross line alignment is processing at different work distances, it is far more enough to apply manual cross line drawing work. In order to make easy and quick cross line alignment for all precise device manufacturing work fields, it just makes an easy and efficient job with a 660nm red cross line laser module. It is emitting formal brightness red laser light directly from an inner 660nm red laser diode. Being made with qualified glass coated lens with different fan angles and gets constant power source supply, this compact size tube made red laser assures the most convenient installation, and easy cross line projection onto various working surfaces.
From the beginning design of 660nm red cross line laser module, it is being made with good thermal emitting system. It gets basic use of metal heat sink cooling system and import 660nm red laser diode. It always gets increasing laser beam stability of at least 40%. In addition, under operation of the most durable anodized aluminum alloy housing tube, even though it is pointing under harsh working occasion of mechanical moving or shocking, it gets no affect by working environments. When it is operating under quite low or high temperature, within -10 to 45 degree Celsius, this red cross laser is performing well, and making quite satisfied cross line alignment for both industrial and high tech cross line alignment work fields.
On basis of the use of qualified glass coated lens with different fan angles of 10, 15 and 110 degree, whatever kind of working surface it is pointing, 660nm red cross line laser module is performing well with high linear quality red cross line source emission in continuous use. It is projecting different dimension red cross line source within 0.5 meter to 6 meters. When it makes constant cross line alignment within 8 to 10 hours, only if there is enough time and space leaving for tube cooling down, it is able to get good performance and highly clear cross line alignment for those of industrial precise cross line alignment works.
Under operation with a laser alignment mounting bracket and extending electric wires, within the maximum installed distance of 3 meters, 660nm red cross line laser module always makes convenient installation and easy cross line projection onto any raw material surface. It is making sure of no track and noncontact red cross line projection, and allowing low cost cross line alignment for all application fields. When users are aware of any thermal energy hurt to eyes and wearing correct laser safety goggles, without eye exposure to beam aperture, it makes easy and safe cross line alignment in long time use.
Convenient Pointed 650nm Red Cross Line Laser Module
Whenever users are trying to make highly clear cross line indication, either it is pointing at close distance and long distance, it is a very easy work for users to make use of advanced laser tech applying device of 650nm red cross line laser module. It projects direct red laser beam from internal 650nm red laser diode. After quite special configuration with an external AC/DC adapter and perfect use of internal cooling system, this cross laser alignment is not only able to work with extremely intense and powerful red laser beam emission, but also projecting highly clear and accurate two perpendicular lines with accurate 90 degrees onto various working surfaces.
This 650nm red cross line laser module always enables quite easy use in any working occasion. It is adopting an external AC/DC adapter as its electric power source. It is working within 5mW to 100mW, only after correct use of 5V, 9V 1000mA DC power supply, it is able to work with continuous red laser beam emission and highly clear red cross line source generation at various work distances. Especially in occasion that high power red laser is operating, owing to special design part of electric wires extension, it is not only allowing freely installed distance of 3 meters, but also assuring the most convenient cross line projection under overheating and over current in continuous use.
Selecting internal metal heat sink cooling system and APC, ACC driving circuit board inside durable aluminum alloy housing tube, 650nm red cross line laser module is adopting different size tube diameter of 16mm and 26mm. It achieves superior nice thermal conductivity, and highly stable and reliable red cross laser source generation under multiple working environments, including mechanical moving or shocking etc. After correct use of 16mm or 26mm diameter tube design, when cross laser alignment gets enough space leaving for tube cooling down, it just maintains excellent laser light cycling use and extremely clear red cross line projecting continuously.
According to advanced use of qualified glass coated lens with different fan angles, 650nm red cross line laser module is generating different dimensions red cross line source at various work distances. After correct use of output power and fan angle, only after quite easy screw of adjustable focus optic lens, this alignment laser enables extremely fine and straight cross line generation at various work distances. Whenever users are paying high attention to thermal energy hurt to human eyes, only after proper wearing of laser safety goggles, it achieves safe and highly clear cross line generation in distance perfectly.
APC Driving Circuit 650nm Red Cross Line Laser Module
If users are looking for a quite efficient cross line alignment, no matter it is processing at close distance or long distance, it might be full of challenge before selecting a quite professional device. At the same time, after making perfect integration with import 650nm red laser diode, glass coated lens and inner cooling system, it is a great technical innovation to develop a quite practically used device of 650nm red cross line laser module. It projects moderate brightness red laser beam directly from inner laser diode, after correct mounting onto desired machine or device, it makes sure of high precision and high speed red cross line source generation at various work distances effectively.
Comparing with any simple red laser pointer only used for temporary dot positioning work, this 650nm red cross line laser module is always workable with continuous cross line projection, while still have to work with good laser beam stability. It employs import 650nm red laser diode within 5mW to 100mW, which is always working with at least 40% improvement of beam stability in use. This cross laser alignment gets basic use of inner metal heat sink cooling system inside high duration metal housing tube. When it is keeping work within 8 to 10 hours per day, after proper use by skilled used or professionals, it is maintaining excellent laser light cycling use and long lifetime of more than 8,000 hours.
Available with APC, ACC driving circuit board, 635nm red cross line laser module is workable with constant output power and electric current supply. Especially in occasion of high power red laser is operating, under increasing temperature, the intelligent feedback system is making perfect protection of any possibility of tube burning out or damage. In formal red cross line projection, users can make quite easy screw of adjustable focus optic lens. The most concentrated red laser beam is converting into extremely fine and quick cross line alignment at all work distances.
Any time 635nm red cross line laser module gets freely selected fan angles of 10, 15 and 110 degree, it generates high linear quality and different dimension cross line source in use. Usually it is passing through basic measurement and experiment, only if it gets correct output power and fan angles, this alignment laser would make quite satisfied cross line measurement within the maximum work distance of 25 meters and other formal lighting occasions. When high power red cross laser is selecting to make long distance measurement, it is a key issue to wear correct laser safety goggles until achieving secured and free use permanently.
The Best Quality Lens Red Cross Line Laser Module
Whatever kind of working surface where users are trying to make the most accurate cross line alignment in distance, not simply used for quite close distance, none of manual or mechanical cross line aligning device can be comparable with red cross line laser module. It is projecting red laser light directly from 650nm red laser diode. When it is employing import 650nm red laser diode tech, under operation with constant electric power source and basic equipment with inner thermal emitting system, this durable structure made cross laser alignment always achieves super nice thermal conductivity and increasing stability in continuous work.
The usual use of red cross line laser module is different from a quite simple red laser pointer, which is required to generated even more complex laser beam in type of two perpendicular lines with accurate 90 degrees. It is designed with the best quality glass coated lens with selected lens degree of 10, 15 and 110 degree. It is producing different cross line length within 0.5 meter to 6 meters, which is also keeping high fineness and high straightness in continuous work. According to basic design with adjustable focus, the most intense red laser light is temporarily concentrated, and then forming into the most compact size red cross line source in distance.
When cross line alignment is processed for quite long time, besides its basic design with thermal emitting system, this red cross line laser module is also passing through quite strict laser beam stability tests. Under quite strict tests, such as super rapid electric current adding test, up to 24 hours aging preventing test and alternative high and low temperature changing test, this cross laser alignment tool achieves superior nice laser light cycling use and the most stable red vertical and horizontal lines projection with accurate 90 degrees.
Under multiple cross line targeting work fields, including those of hard reaching places, red cross line laser module is only used as an accessory part and enables quite convenient use under the assistance of laser alignment mounting bracket. No matter it is designed with 16mm or 26mm diameter tube, this alignment laser is always allowing quite easy installation and adjustment, and then producing the most satisfied cross line surface as long as 25 meters. When quite powerful thermal energy and powerful red laser light are generated from beam aperture, only after proper wearing of laser safety goggles, it obtains the most secured cross line targeting in distance perfectly.
635nm Red Cross Line Laser with Glass Coated Lens
Under special requirement of highly clear and accurate cross line alignment under quite long work distance and high lighting working environments, it is not an easy job for users before selecting a quite professional laser device as expected. Not the same as a temporary positioning tool of red laser pointer, it is just a quite special experience for users to adopt 635nm red cross line laser. When it is generating high purity and high brightness red laser light from 635nm red laser diode, under operation with quite low laser beam divergence and quite high quality glass coated lens, this cross laser alignment tool is generating the most accurate and the finest red vertical or horizontal lines generation with accurate 90 degrees in distance efficiently.
This 635nm red cross line laser is available with import red laser diode as its beam emitting source, which is getting at least 40% improvement of laser beam stability in continuous work. Under quite long time cross line alignment on various targeting surfaces, this cross laser module is also being made with inner metal heat sink cooling system, after perfect configuration with quite durable aircraft used aluminum alloy housing tube, it is just achieving excellent thermal conductivity and the most stable red vertical and horizontal lines generation with accurate 90 degrees in distance immediately.
Whenever 635nm red cross line laser gets freely selected optic lens degree of 10, 15 and 110 degree, it is generating different cross line length and thickness in use. It is a quite practically used and industrial stabilized cross line aligning tool. When it is selecting quite high quality glass coated lens, not the same as a formal plastic coated lens, it is keeping quite high linear quality and high straightness red cross line source projection in use. Under condition that 635nm cross laser module is achieving different cross line length within 0.5 meter to 6 meters, after proper selection of optic lens degree, it achieves the most satisfied measuring result for laser alignment for screen printing system, heat transfer machine, laser medical therapy and high tech works etc.
Under easy use of laser alignment mounting bracket, even though some of working place is not easy to reach, 635nm red cross line laser module is still allowing quite convenient installation. After freely installed distance of 0.3 meter to 3 meters, it is properly installed and then making quite convenient two perpendicular lines within the maximum distance of 25 meters. under quite nice use of APC, ACC driving circuit board, even though this alignment laser is selected with high power up to 50mW to 100mW, it is keeping constant power and electric current supply, and generating the most stable red cross line laser source projection. Only after correct wearing of laser safety goggles and avoiding eye exposure, this industrial red cross laser assures free and safe alignment perfectly.
What is The Most Accurate Red Cross Line Laser Module
What is your solution to make extremely clear and accurate cross line alignment in distance? Without the use of formal cross line printing device, such as formal manual or mechanical cross line aligning devices, it would be quite efficient solution for users to adopt red cross line laser module. It is projecting direct and quick red laser beam emission from inner 650nm red laser diode, after production with inner cooling system and continuous electric power source from DC input power supply, this red cross laser is just workable with highly clear and stable performance for all precise device manufacturing works effectively.
It should have to spend quite long time for prior manual cross line drawing work with a simple triangular meter, blocking board or square meter. However, it is far more enough to get ideal cross line alignment for quite long time and quite long work distance etc. When users are getting serious accurate and rapid measurement on various targeting surfaces, red cross line laser module is bringing users totally different experience in continuous use. When it is getting continuous electric power source of DC input power supply, supported by 3V or 9V operating voltage, this cross laser alignment tool makes sure of continuous red vertical and horizontal lines projection in distance easily.
The genuine cross line alignment with red cross line laser module would be processed for quite long time, thus it would have to be made with high level of laser beam stability in continuous work. It is adopting durable aircraft used aluminum alloy housing tube and inner cooper made red laser diode core part, cooperated with inner metal heat sink cooling system, this cross laser alignment tool achieves excellent thermal conductivity. In addition, under quite low or high temperature, it is still generating highly bright red cross line source in use. Under occasion that red cross laser is properly installed, within freely installed distance of 0.3 meter to 3 meters, it is making quite convenient two perpendicular lines generation with accurate 90 degrees.
Under freely selected optic lens degree of 10, 15 and 110 degree, under multiple application fields, red cross line laser module generates different dimension cross line source in use. Within obtained cross line length of 0.5 meter to 6 meters, under proper screw of adjustable cylindrical lens, this alignment laser gets high speed concentration of red laser light emission and super fine thickness red cross line source emission in use. Under quite professional wearing of laser safety goggles and avoiding eye exposure to powerful red light and thermal energy, this cross laser alignment tool achieves easy and free measurement perfectly.