Different from any other manual or mechanical cross line alignment device, once cross line generation work is processing at long extending distance, it should be a quite nice beginning for users to operate a direct diode emission made device of a 635nm red cross line laser module. Being made with a qualified glass coated lens with different fan angles and good use of thermal emitting system, once it is cooperating with a high duration and ultra compact size tube made metal housing tube, this direct diode emission made cross laser alignment brings users ultra clear and stable red cross line generation for all machinery processing works continuously.
The basic use of a 635nm red cross line laser module has to work for various environments, thus it applies the most durable anodized aluminum alloy housing tube. It is bearing wide range operating temperature and any harsh working occasion, including mechanical moving, shocking or calibration etc. As a result, whenever it is passing through a series of strict laser beam stability test, aging preventing test, alternative high and low temperature changing test, only after its proper use by skilled users, this cross laser alignment tool is easily achieving ultra stable and reliable cross line generation within long extending distance.
Cooperating with a qualified glass coated lens with different fan angles of 10, 15 and 110 degree, whatever kind of working surface it is pointing, this 635nm red cross line laser module is emitting high transmittance red laser light source, and ultra clear and fine red cross line source at long distance. It gets different cross line lengths of 0.5 meter to 6 meters. In addition, after its special laser beam mode of TEM00 laser beam and less than 1mrad laser beam divergence, this red cross laser alignment tool also enables ultra fine red cross line source generation as long as 25 meters.
According to the use of 16mm and 26mm diameter metal housing tube, together with its electric wires extension, this 635nm red cross line laser module always enables convenient installation and quick reaching of red cross line source generation onto multiple working surfaces. The unique use of adjustable focus optic lens enables high concentration red laser light source emission, and high efficiency conversion of fine and straight red cross line projection. When it alignment laser gets high power up to 50mW to 100mW, after correct wearing of laser safety goggles and avoiding eye exposure to laser beam aperture, it always brings users no danger and no mistake use for all working occasions effectively.
Category: red cross line laser module
what is the best job of glass coated lens 635nm red cross line laser module?
different from any prior cross line drawing or printing work, no matter it is pointing at close or long distance, it should be a quite nice job to operate a high density beam emitting tool of a 635nm red cross line laser module. owing to the use of an advanced use of qualified laser diode and optic lens with different fan angles, only after its proper installation onto those of industrial machine or device, this cross laser alignment always brings users quite satisfied cross line projection at great distance and high lighting working occasions effectively.
owing to the special use of an ac/dc adapter, the genuine cross line alignment work with a 635nm red cross line laser module is continuing for a quite long time. it applies an import 635nm red laser diode within 5mw to 100mw as its beam emitting source. in practical precise cross line projection work, only after leaving time and space for tube cooling down, this cross laser alignment tool is able to make quite stable and reliable red cross line projection within the longest lasting time of 10 hours per day.
within quite long work distance and high lighting working occasion, according to real working occasion, this 635nm red cross line laser module enables correct use of output power and optic lens fan angle. employed by a qualified glass coated lens with different fan angles of 10, 15 and 110 degree, it keeps work with high linear quality and highly fine red cross line projection within 0.5 meter to 6 meters lengths. in those of industrial precise machinery processing work fields, this cross laser alignment tool is able to provide users quite satisfied measuring results for laser alignment for screen printing system, heat transfer machine, laser medical therapy, military cross line alignment, high tech and lab experiment work etc.
designed with 16mm and 26mm diameter tube design, within freely installed distance of 3 meters, this 635nm red cross line laser module always enables easy installation and quick reaching of red vertical and horizontal lines generation at different work distances. for the most important of all, owing to its special use of adjustable focus optic lens, after its immediate red laser light source concentration, this alignment laser enables increasing accuracy cross line projection at great distance and high lighting as well. users should take basic laser safety measure and wear correct laser safety goggles until achieving easy, free and long lasting cross line projection in all working occasions.
Highly Precise Use of DC Power 650nm Red Cross Line Laser Module
Whenever cross line alignment work is processing at long extending distance, it is far more enough to reach with any prior cross line measuring work at all. At the same time, on the basis of constant technical innovation of a 650nm red laser diode tech and a qualified glass coated lens with different fan angles, it is developing into a quite practically used device of a 650nm red cross line laser module. It is performing well with ultra clear and fine red cross line projection at long extending distance. Any time this ultra compact size tube made laser device gets proper installation and adjustment to correct position, it brings users low price, long lasting and high stability cross line generation for a lot of application fields effectively.
The usual use of a 650nm red cross line laser module is in need to make long lasting cross line alignment onto different working surfaces, thus it has to maintain its stable and reliable cross line projection in long lasting use. Being made with an import 650nm red laser diode within 5mW to 100mW, even though it projects similar red laser beam as a red laser pointer, however, it is getting higher attention to its thermal emitting design. The inner part of a metal heat sink cooling system is perfectly configured with a high duration anodized aluminum alloy housing tube. As a result, any time this cross laser alignment is making long lasting cross line alignment within 10 hours, it still maintains high level of laser light cycling use and highly reliable cross line generation in proper use.
On the basis of a qualified glass coated lens with different fan angles of 10, 15 and 110 degree, in a large variety of industrial and high tech precise cross line measuring works, this 650nm red cross line laser module is projecting different dimension and high precision two perpendicular red lines with accurate 90 degrees. In process of long lasting cross line alignment work, in order to maintain its long lasting cross line alignment, this cross laser alignment tool has just passed through a series of strict laser beam stability and aging preventing test before its flowing into laser market. On condition that it makes continuous red cross line projection by skilled users, it still maintains highly reliable cross line projection for labs, institutes and colleges etc.
According to the special use of laser alignment mounting bracket and special use of electric wires extension, within freely installed distance of 3 meters, this 650nm red cross line laser module enables easy reaching and no barrier cross line generation in a lot of application fields. It enables long lasting cross line projection and reduced possibility of tube burning out or damage. Whenever this red alignment laser gets proper installation, after high attention to thermal energy hurt to eyes and correct wearing of laser safety goggles, it brings users easy and secured cross line measurement for all working occasions effectively.
Glass Coated Lens 650nm Red Cross Line Laser Module
In process of highly clear and fine enough cross line alignment at various work distances, it is far more enough to reach with any manual or mechanical cross line drawing work at all. The genuine use of 650nm red cross line laser module is always projecting highly visible and bright red laser light at several miles far away. In practical precise cross line alignment work, owing to advanced use of qualified glass coated lens with different fan angles and constant power source supply, not simply relying on any manual labor force input, it assures the lowest price, the most stable and reliable red vertical and horizontal lines generation onto various working surfaces constantly.
Being made with high duration anodized aluminum alloy housing tube, within wide range operating temperature of -10 to 45 degree Celsius, 650nm red cross line laser module is applicable for various working environments. Even though it is making cross line alignment under harsh occasion, such as mechanical moving or shocking etc, it still gets no effect at all and maintains highly stable and reliable cross line generation in long lasting use. Cooperating with a metal heat sink cooling system inside different dimension metal housing tube, after getting superior nice thermal emitting and thermal conductivity, this cross laser alignment still makes sure of highly reliable performance and highly clear red cross line generation in long lasting use.
Whatever kind of working surface it is pointing, on basis of the use of qualified glass coated lens within different fan angles of 10, 15 and 110 degree, this 650nm red cross line laser module is working well with high linear quality and highly straight red cross line source. It projects different cross line lengths of 0.5meter to 6 meters. On basis of basic measurement and experiment of cross line length, fineness and work distance, after correct use of output power and glass coated lens degree, this red cross laser makes sure of high precision cross line measurement for both industrial and high tech precise cross line measuring fields effectively.
Available with different dimension metal housing tube design, together with electric wires for both 650nm red cross line laser module and DC power supply, it always allows convenient installation and quick reaching of red cross line source indication in continuous use. It is a necessity to mount it onto desired machine or device, after its freely adjusted laser beam focus and cross line projecting direction, this alignment laser gets high intensity red laser light and increasing accuracy cross line measurement in distance. According to high attention to laser safety issue and correct wearing of laser safety goggles, without eye exposure to beam aperture, it achieves easy and secured use in long lasting use.
Adjusted Fineness Glass Coated Lens 5mW 10mW 20mW 50mW 100mW 660nm Red Cross Line Laser Modules
Whenever cross line alignment is processing at different work distances, it is far more enough to apply manual cross line drawing work. In order to make easy and quick cross line alignment for all precise device manufacturing work fields, it just makes an easy and efficient job with a 660nm red cross line laser module. It is emitting formal brightness red laser light directly from an inner 660nm red laser diode. Being made with qualified glass coated lens with different fan angles and gets constant power source supply, this compact size tube made red laser assures the most convenient installation, and easy cross line projection onto various working surfaces.
From the beginning design of 660nm red cross line laser module, it is being made with good thermal emitting system. It gets basic use of metal heat sink cooling system and import 660nm red laser diode. It always gets increasing laser beam stability of at least 40%. In addition, under operation of the most durable anodized aluminum alloy housing tube, even though it is pointing under harsh working occasion of mechanical moving or shocking, it gets no affect by working environments. When it is operating under quite low or high temperature, within -10 to 45 degree Celsius, this red cross laser is performing well, and making quite satisfied cross line alignment for both industrial and high tech cross line alignment work fields.
On basis of the use of qualified glass coated lens with different fan angles of 10, 15 and 110 degree, whatever kind of working surface it is pointing, 660nm red cross line laser module is performing well with high linear quality red cross line source emission in continuous use. It is projecting different dimension red cross line source within 0.5 meter to 6 meters. When it makes constant cross line alignment within 8 to 10 hours, only if there is enough time and space leaving for tube cooling down, it is able to get good performance and highly clear cross line alignment for those of industrial precise cross line alignment works.
Under operation with a laser alignment mounting bracket and extending electric wires, within the maximum installed distance of 3 meters, 660nm red cross line laser module always makes convenient installation and easy cross line projection onto any raw material surface. It is making sure of no track and noncontact red cross line projection, and allowing low cost cross line alignment for all application fields. When users are aware of any thermal energy hurt to eyes and wearing correct laser safety goggles, without eye exposure to beam aperture, it makes easy and safe cross line alignment in long time use.
Convenient Pointed 650nm Red Cross Line Laser Module
Whenever users are trying to make highly clear cross line indication, either it is pointing at close distance and long distance, it is a very easy work for users to make use of advanced laser tech applying device of 650nm red cross line laser module. It projects direct red laser beam from internal 650nm red laser diode. After quite special configuration with an external AC/DC adapter and perfect use of internal cooling system, this cross laser alignment is not only able to work with extremely intense and powerful red laser beam emission, but also projecting highly clear and accurate two perpendicular lines with accurate 90 degrees onto various working surfaces.
This 650nm red cross line laser module always enables quite easy use in any working occasion. It is adopting an external AC/DC adapter as its electric power source. It is working within 5mW to 100mW, only after correct use of 5V, 9V 1000mA DC power supply, it is able to work with continuous red laser beam emission and highly clear red cross line source generation at various work distances. Especially in occasion that high power red laser is operating, owing to special design part of electric wires extension, it is not only allowing freely installed distance of 3 meters, but also assuring the most convenient cross line projection under overheating and over current in continuous use.
Selecting internal metal heat sink cooling system and APC, ACC driving circuit board inside durable aluminum alloy housing tube, 650nm red cross line laser module is adopting different size tube diameter of 16mm and 26mm. It achieves superior nice thermal conductivity, and highly stable and reliable red cross laser source generation under multiple working environments, including mechanical moving or shocking etc. After correct use of 16mm or 26mm diameter tube design, when cross laser alignment gets enough space leaving for tube cooling down, it just maintains excellent laser light cycling use and extremely clear red cross line projecting continuously.
According to advanced use of qualified glass coated lens with different fan angles, 650nm red cross line laser module is generating different dimensions red cross line source at various work distances. After correct use of output power and fan angle, only after quite easy screw of adjustable focus optic lens, this alignment laser enables extremely fine and straight cross line generation at various work distances. Whenever users are paying high attention to thermal energy hurt to human eyes, only after proper wearing of laser safety goggles, it achieves safe and highly clear cross line generation in distance perfectly.
APC Driving Circuit 650nm Red Cross Line Laser Module
If users are looking for a quite efficient cross line alignment, no matter it is processing at close distance or long distance, it might be full of challenge before selecting a quite professional device. At the same time, after making perfect integration with import 650nm red laser diode, glass coated lens and inner cooling system, it is a great technical innovation to develop a quite practically used device of 650nm red cross line laser module. It projects moderate brightness red laser beam directly from inner laser diode, after correct mounting onto desired machine or device, it makes sure of high precision and high speed red cross line source generation at various work distances effectively.
Comparing with any simple red laser pointer only used for temporary dot positioning work, this 650nm red cross line laser module is always workable with continuous cross line projection, while still have to work with good laser beam stability. It employs import 650nm red laser diode within 5mW to 100mW, which is always working with at least 40% improvement of beam stability in use. This cross laser alignment gets basic use of inner metal heat sink cooling system inside high duration metal housing tube. When it is keeping work within 8 to 10 hours per day, after proper use by skilled used or professionals, it is maintaining excellent laser light cycling use and long lifetime of more than 8,000 hours.
Available with APC, ACC driving circuit board, 635nm red cross line laser module is workable with constant output power and electric current supply. Especially in occasion of high power red laser is operating, under increasing temperature, the intelligent feedback system is making perfect protection of any possibility of tube burning out or damage. In formal red cross line projection, users can make quite easy screw of adjustable focus optic lens. The most concentrated red laser beam is converting into extremely fine and quick cross line alignment at all work distances.
Any time 635nm red cross line laser module gets freely selected fan angles of 10, 15 and 110 degree, it generates high linear quality and different dimension cross line source in use. Usually it is passing through basic measurement and experiment, only if it gets correct output power and fan angles, this alignment laser would make quite satisfied cross line measurement within the maximum work distance of 25 meters and other formal lighting occasions. When high power red cross laser is selecting to make long distance measurement, it is a key issue to wear correct laser safety goggles until achieving secured and free use permanently.
Constant Aligned Pro Red Cross Laser Alignment
Being made with the best quality glass coated lens and import 635nm red laser diode, whenever laser tech engineer is developing pro red cross laser alignment, it is able to work with extremely intense and powerful red laser light emission and quite complex two perpendicular red lines with accurate 90 degrees. When it is adopting modifying electric power source of DC input power supply, it is not only getting continuous electric power source, but also ensuring extra large space reserving as its cooling system and assuring highly stable red cross line targeting result in distance.
When pro red cross laser alignment is being made with 635nm red laser diode, it is always projecting high purity red laser light, which is getting at least 3 times brighter laser light from formal 650m red laser device. In addition, according to quite special laser beam mode of TEM00 and quite low laser beam divergence, it is keeping work with extremely fine and straight red cross line source in use. At the same time, according to quite easy adjustment of laser beam focus, cross laser module gets super rapid red light concentration and extremely fine red cross line source projection in distance easily.
Under proper use of qualified glass coated lens, selected from 10, 15 and 110 degree, pro red cross laser alignment is generating different cross line length and thickness in use. When it is producing selected cross line length within 0.5 meter to 6 meters, under quite strict laser beam stability tests up to 24 hours, it is just making highly clear cross line targeting for multiple application fields, such as laser alignment for screen printing system, laser medical therapy, military targeting and heat transfer machine etc. Whenever the genuine cross line targeting work is processed within the maximum distance of 25 meters, it is just keeping super fine cross line targeting and no decay light emission in continuous work.
According to easy use of APC, ACC driving circuit board, pro red cross laser alignment is keeping work with constant electric current supply and output power emission. Even though there is quite rapid temperature increasing of laser module tube, the intelligent feedback system is protecting laser tube from burning out or damage, which is just keeping the most reliable and stable cross line targeting in long term use. In addition, according to perfect attention to the most powerful red laser light and thermal energy from high power alignment laser, only after correct wearing of laser safety goggles, it achieves easy and safe cross line positioning result in distance perfectly.
635nm Red Cross Line Laser with Glass Coated Lens
Under special requirement of highly clear and accurate cross line alignment under quite long work distance and high lighting working environments, it is not an easy job for users before selecting a quite professional laser device as expected. Not the same as a temporary positioning tool of red laser pointer, it is just a quite special experience for users to adopt 635nm red cross line laser. When it is generating high purity and high brightness red laser light from 635nm red laser diode, under operation with quite low laser beam divergence and quite high quality glass coated lens, this cross laser alignment tool is generating the most accurate and the finest red vertical or horizontal lines generation with accurate 90 degrees in distance efficiently.
This 635nm red cross line laser is available with import red laser diode as its beam emitting source, which is getting at least 40% improvement of laser beam stability in continuous work. Under quite long time cross line alignment on various targeting surfaces, this cross laser module is also being made with inner metal heat sink cooling system, after perfect configuration with quite durable aircraft used aluminum alloy housing tube, it is just achieving excellent thermal conductivity and the most stable red vertical and horizontal lines generation with accurate 90 degrees in distance immediately.
Whenever 635nm red cross line laser gets freely selected optic lens degree of 10, 15 and 110 degree, it is generating different cross line length and thickness in use. It is a quite practically used and industrial stabilized cross line aligning tool. When it is selecting quite high quality glass coated lens, not the same as a formal plastic coated lens, it is keeping quite high linear quality and high straightness red cross line source projection in use. Under condition that 635nm cross laser module is achieving different cross line length within 0.5 meter to 6 meters, after proper selection of optic lens degree, it achieves the most satisfied measuring result for laser alignment for screen printing system, heat transfer machine, laser medical therapy and high tech works etc.
Under easy use of laser alignment mounting bracket, even though some of working place is not easy to reach, 635nm red cross line laser module is still allowing quite convenient installation. After freely installed distance of 0.3 meter to 3 meters, it is properly installed and then making quite convenient two perpendicular lines within the maximum distance of 25 meters. under quite nice use of APC, ACC driving circuit board, even though this alignment laser is selected with high power up to 50mW to 100mW, it is keeping constant power and electric current supply, and generating the most stable red cross line laser source projection. Only after correct wearing of laser safety goggles and avoiding eye exposure, this industrial red cross laser assures free and safe alignment perfectly.
The Clearest Positioning Red Cross Line Laser Module
No matter what kind of working surface it is pointed, including those of quite hard reaching places, it is the most convenient and efficient solution for users to select red cross line laser module. It is generating red laser light directly from 650nm red laser diode. When it is quite mature laser diode tech and perfect equipment with inner thermal emitting system, after production into a real cross laser alignment tool, it is not only keeping highly stable and reliable red cross line source projection from laser beam aperture, but also getting the lowest production cost for all kinds of industrial precise device manufacturing works effectively.
This red cross line laser module is not the same as formal dot or line projecting laser device, but just keeping quite complex laser beam emission in type of two perpendicular lines generations with accurate 90 degrees. It is employing the most qualified glass coated lens as its cross line emitting source. It is getting freely selected optic lens degree of 10, 15 and 120 degree, which is able to generate different cross line length within 0.5 meter to 6 meters in use. After quite strict laser beam stability tests up to 24 hours, under proper use by skilled users or professionals, this red cross laser is keeping stable enough performance and long serving lifetime in proper use.
No matter what kind of working surface it is pointed, including those of quite hard reaching places, red cross line laser module is being made with high duration aircraft used aluminum alloy housing tube and inner copper made red laser diode core part. It is keeping work with superior nice thermal conductivity, and also assuring highly stable red vertical and horizontal lines generation with accurate 90 degrees in continuous work. This cross laser alignment tool is accepting wide range operating temperature within -10 to 45 degree Celsius, it is still keeping highly bright red light emission and highly stable cross line generation under any type of mechanical shocking, calibration or moving etc.
According to quite special designed electric wires extension for red cross line laser module and DC input power supply, within freely installed distance of 0.3 meter to 3 meters, it is always keeping quite convenient installation and adjustment until achieving quite convenient and easy red cross line projection in continuous works. Whenever this alignment laser is selected with quite high power up to 50mW to 100mW, under operation of cross line generation at quite long work distance, it is also producing powerful thermal energy from beam aperture. It is just a key issue to wear professional laser safety goggles and avoid eye exposure until achieving easy and free measurement constantly.