red cross line laser – Page 2 – Red Dot, Line and Cross Line Laser Modules

635nm Red Cross Line Laser with Glass Coated Lens

Under special requirement of highly clear and accurate cross line alignment under quite long work distance and high lighting working environments, it is not an easy job for users before selecting a quite professional laser device as expected. Not the same as a temporary positioning tool of red laser pointer, it is just a quite special experience for users to adopt 635nm red cross line laser. When it is generating high purity and high brightness red laser light from 635nm red laser diode, under operation with quite low laser beam divergence and quite high quality glass coated lens, this cross laser alignment tool is generating the most accurate and the finest red vertical or horizontal lines generation with accurate 90 degrees in distance efficiently.

This 635nm red cross line laser is available with import red laser diode as its beam emitting source, which is getting at least 40% improvement of laser beam stability in continuous work. Under quite long time cross line alignment on various targeting surfaces, this cross laser module is also being made with inner metal heat sink cooling system, after perfect configuration with quite durable aircraft used aluminum alloy housing tube, it is just achieving excellent thermal conductivity and the most stable red vertical and horizontal lines generation with accurate 90 degrees in distance immediately.
Whenever 635nm red cross line laser gets freely selected optic lens degree of 10, 15 and 110 degree, it is generating different cross line length and thickness in use. It is a quite practically used and industrial stabilized cross line aligning tool. When it is selecting quite high quality glass coated lens, not the same as a formal plastic coated lens, it is keeping quite high linear quality and high straightness red cross line source projection in use. Under condition that 635nm cross laser module is achieving different cross line length within 0.5 meter to 6 meters, after proper selection of optic lens degree, it achieves the most satisfied measuring result for laser alignment for screen printing system, heat transfer machine, laser medical therapy and high tech works etc.
Under easy use of laser alignment mounting bracket, even though some of working place is not easy to reach, 635nm red cross line laser module is still allowing quite convenient installation. After freely installed distance of 0.3 meter to 3 meters, it is properly installed and then making quite convenient two perpendicular lines within the maximum distance of 25 meters. under quite nice use of APC, ACC driving circuit board, even though this alignment laser is selected with high power up to 50mW to 100mW, it is keeping constant power and electric current supply, and generating the most stable red cross line laser source projection. Only after correct wearing of laser safety goggles and avoiding eye exposure, this industrial red cross laser assures free and safe alignment perfectly.

What is The Most Accurate Red Cross Line Laser Module

What is your solution to make extremely clear and accurate cross line alignment in distance? Without the use of formal cross line printing device, such as formal manual or mechanical cross line aligning devices, it would be quite efficient solution for users to adopt red cross line laser module. It is projecting direct and quick red laser beam emission from inner 650nm red laser diode, after production with inner cooling system and continuous electric power source from DC input power supply, this red cross laser is just workable with highly clear and stable performance for all precise device manufacturing works effectively.

It should have to spend quite long time for prior manual cross line drawing work with a simple triangular meter, blocking board or square meter. However, it is far more enough to get ideal cross line alignment for quite long time and quite long work distance etc. When users are getting serious accurate and rapid measurement on various targeting surfaces, red cross line laser module is bringing users totally different experience in continuous use. When it is getting continuous electric power source of DC input power supply, supported by 3V or 9V operating voltage, this cross laser alignment tool makes sure of continuous red vertical and horizontal lines projection in distance easily.
The genuine cross line alignment with red cross line laser module would be processed for quite long time, thus it would have to be made with high level of laser beam stability in continuous work. It is adopting durable aircraft used aluminum alloy housing tube and inner cooper made red laser diode core part, cooperated with inner metal heat sink cooling system, this cross laser alignment tool achieves excellent thermal conductivity. In addition, under quite low or high temperature, it is still generating highly bright red cross line source in use. Under occasion that red cross laser is properly installed, within freely installed distance of 0.3 meter to 3 meters, it is making quite convenient two perpendicular lines generation with accurate 90 degrees.
Under freely selected optic lens degree of 10, 15 and 110 degree, under multiple application fields, red cross line laser module generates different dimension cross line source in use. Within obtained cross line length of 0.5 meter to 6 meters, under proper screw of adjustable cylindrical lens, this alignment laser gets high speed concentration of red laser light emission and super fine thickness red cross line source emission in use. Under quite professional wearing of laser safety goggles and avoiding eye exposure to powerful red light and thermal energy, this cross laser alignment tool achieves easy and free measurement perfectly.

Freely Adjusted 650nm Red Cross Line Laser Module

Under condition that users are trying to make continuous cross line alignment, formal manual cross line drawing device is not helpful at all. When laser tech engineer is developing quite practically used measuring device, such as a 650nm red cross line laser module, equipped with the most qualified glass coated lens, it is keeping work with quite accurate 90 degrees two perpendicular lines generation in distance effectively.

Whenever it is getting freely selected optic lens degree and output power, it would always make sure of easy and rapid cross line alignment constantly.
This 650nm red cross line laser module gets excellently used glass coated lens. It is always used for continuous cross line alignment work, it is also passing through quite strict beam stability test up to 24 hours. In process of quite long term or quite long distance aligning work, this cross laser alignment tool is generating high linear quality red cross line source. Selected from 10, 15 and 110 degree optic lens degree, it is achieving different cross line length within 0.5 meter to 6 meters. If users are not quite familiar with laser device selection, it is just necessary for laser users to make enough communication with laser tech engineer. According to desired line length, line thickness and work distance from laser beam aperture, red cross laser is just recommended with correct output power and optic lens degree.
This 650nm red cross line laser module gets easy installation under the assistance of laser alignment mounting bracket. It is selected external electric power source of DC input power supply. Supported by extending electric wires for both red laser and DC input power supply, usually within the freely installed distance of 0.3 meter to 3 meters, it is allowing quite easy installation and adjustment, also getting quite satisfied red cross line projection stably under high temperature and strong corrosion etc. Noncontact red cross line targeting also leaves no track on raw material surfaces and ensures no mistake cross line alignment as expected.
In continuous cross line generation work, whatever kind of output power it is selected, 650nm red cross line laser module gets rapid tube temperature increasing in constant cross line aligning work. However, the inner design part of APC, ACC driving circuit board ensures constant electric power supply and efficient preventing of electric current impacting. It is allowing operation within 8 to 10 hours, revering enough time for laser tube cooling down, this alignment laser would just maintain excellent laser light cycling use and long serving lifetime. Only according to basic laser safety issue and proper wearing of laser safety goggles, high power red cross laser would also assure easy and safe measurement constantly.

High Efficiency Aligned Glass Lens 635nm Red Cross Line Laser Module

If users are not able to get clear enough cross line generation on multiple raw material surfaces, any type of manual or mechanical cross line aligning devices is not helpful at all. After proper use of advanced 635nm red laser diode tech applied laser device, such as a red cross line laser module, it is workable with the purest light emission and the finest red vertical and horizontal lines generation with accurate 90 degrees. This red cross laser gets easy installation and adjustment of cross line thickness and targeting direction, within the maximum work distance of 25 meters, it would make sure of high level of accuracy cross line generation in distance easily.

The real operation of 635nm red cross line laser module is different from 650nm red laser device. When it is getting at least 3 times brighter laser light and quite low beam divergence, it is obtaining the finest line thickness in use. For instance, red cross line is as fine as 0.3mm at about 10cm work distance, and achieving high fineness of only 1mm to 2mm at about 2 meters distance from beam aperture to real working surface. Owing to the most specially designed adjustable focus, only after quite easy screw of beam aperture, this cross laser alignment tool obtains quite satisfied cross line thickness and high level of accuracy cross line generation.
Whatever kind of working surface it is pointed, including those of hard reaching places, 635nm red cross line laser module is being used as an accessory part. This 16mm or 26mm diameter tube designed red laser enables quite easy installation within 0.3 meter to 3 meters, and then achieving high level of accuracy cross line generation on any vertical or horizontal surfaces effectively. The genuine red cross line generation is not affected by any long distance, high height and other complex working environments, also getting no serious relying on professional skills at all.
In order to achieve high level of accuracy cross line generation constantly, 635nm red cross line laser module gets easily selected optic lens degree of 10, 15 and 110 degree. Within 0.5 meter to 6 meters cross line length, this industrial stabilized alignment laser enables easy and convenient measurement for multiple work fields, including laser alignment for screen printing system, laser medical therapy, military targeting and other high tech work fields etc. In occasion that users are paying high attention of powerful and intense red light and thermal energy, after proper wearing of 635nm wavelength preventing laser safety goggles, this red cross laser makes sure of no mistake measurement perfectly.