660nm red laser module – Red Dot, Line and Cross Line Laser Modules

Good Use of 660nm Red Laser Diode Module in Construction Field

In order to get quite clear and accurate dot indication onto multiple working surfaces, not able to work with manual dot projecting work, it would be a much better job to operate a highly bright beam emitted device of a 660nm red laser diode module. It can provide millimeter level accuracy dot alignment, thus it is applicable for high precision measurement and alignment for various construction works. Only if users are passing through simple operation, after easy connects with an external electric power source and proper integration with other constructing machine or equipment, this 660nm red dot laser will always makes ultra clear, precise and high speed dot indication for all construction personnel effectively.

Connected with an AC/DC adapter, not spending extra time on alkaline battery power source, the genuine use of a 660nm red laser diode module is able to make continuous red laser beam emission from an inner semiconductor red laser diode within 5mW to 100mW output power. It gets no battery power source change, but getting even larger space leaving for tube cooling down. When 660nm red dot laser makes continuous red dot projection within daily operating time of 8 to 10 hours, it is able to work with ultra clear and stable red dot indication, without any light decay or dim in proper use. Only simple operation is required to emit a stable red laser beam, without complex equipment debugging and professional skills, which reduces the difficulty of operation for construction personnel.

When 660nm red laser diode module applies a qualified glass coated lens, it enables high density and high transmittance red laser light source emission at long extending distance. After its correct use of output power, and proper installation and integration to desired machine or device, it avoids the errors and damage to the construction surface that may be caused by contact measurement, and is also suitable for the measurement and positioning of some parts that are not easy to directly contact.

Application introduction

Horizontal and vertical positioning: In construction, 660nm red laser diode module is used to determine the horizontal and vertical reference lines. For example, when pouring floor slabs, horizontal laser dots are emitted to ensure the flatness of the floor slab surface. When it is used for building high-rise buildings, vertical red laser dots are used to ensure the verticality of the walls.
Formwork installation: It provides precise red laser dot positioning for the installation of the formwork. Construction personnel can adjust the position and angle of the formwork according to the position of the laser dot so as to ensure accurate installation of the formwork, thereby ensuring that the shape and size of the concrete after pouring meet the design requirements.

Measurement and layout: In the measurement and layout work of the construction site, the 660nm red laser diode module can project clear red reference dot to help surveyors quickly and accurately determine the measurement points and layout positions, and improve measurement accuracy and work efficiency.

What is the real practicality in construction work?

Improve construction quality: Through precise red dot positioning and measurement, the dimensional accuracy and flatness of the building can be effectively controlled, construction errors can be reduced, and the overall construction quality can be improved.

Improve work efficiency: Compared with traditional measurement and positioning methods, the 660nm red laser diode module can quickly project clear red dot, reducing the time for manual measurement and marking, and speeding up the construction progress.

Adapt to a variety of environments: Whether indoors or outdoors, whether during the day or at night, the 660nm red dot laser module has high visibility, can work normally under different lighting conditions, and adapt to various complex construction environments.

Different Fan Angles 660nm Glass Coated Lens Red Line Laser Modules

If users are not able to make clear enough line alignment at longer distance than formal hand reaching, it is not help at all to rely on the use of a square meter or blocking board. At the same time, laser tech engineer is also making continuous technical innovation of 660nm red laser diode tech. Being made with the best quality glass coated lens with different fan angles and constant power source supply, this direct diode emission made device of laser line generator just assures high stability red laser beam and red reference line projection at various work distances.

From the very beginning design of 660nm red line laser module, it is paying high attention to its thermal emitting system. The basic use of an import 660nm red laser diode and metal heat sink cooling system are assuring at least 40% improvement of laser beam stability in continuous use. When it is getting wide range output power of 5mW to 100mW, only after correct use of 5V, 9V 1000mA DC power supply, this laser line generator is able to project highly clear and fine red reference line projection within wide range work distance and other formal lighting working occasions as well.
When 660nm red line laser module is working onto various working surfaces, it should have to work with different line lengths and line fineness in continuous use. It is applying a qualified glass coated lens within 10 to 110 degree. It is projecting high linear quality red reference line. In addition, any time it is getting serious need of highly clear and fine line source in continuous use, it has also passed through up to 24 hours aging preventing and beam stability tests. Only if this red laser line generator is operating by skilled users and professionals, within constant line alignment work of 8 to 10 hours per day, it just makes sure of highly clear and stable red line alignment at various work distances.
In a lot of application fields, including laser cutting machine, sand milling, lumber machine and other raw material processing works, this 660nm Gaussian beam red line laser module should only be working as an accessory part. With the assistance of a laser alignment mounting bracket and special use of extending electric wires, within the maximum installed distance of 3 meters, this red alignment laser always makes no barrier and no mistake line alignment in long time use. When users are aware of any powerful red laser radiation and reflection, after proper wearing of laser safety goggles, high power red line laser up to 50mW to 100mW always brings users no danger and no mistake line alignment in long distance.

Adjusted Fineness Glass Coated Lens 5mW 10mW 20mW 50mW 100mW 660nm Red Cross Line Laser Modules

Whenever cross line alignment is processing at different work distances, it is far more enough to apply manual cross line drawing work. In order to make easy and quick cross line alignment for all precise device manufacturing work fields, it just makes an easy and efficient job with a 660nm red cross line laser module. It is emitting formal brightness red laser light directly from an inner 660nm red laser diode. Being made with qualified glass coated lens with different fan angles and gets constant power source supply, this compact size tube made red laser assures the most convenient installation, and easy cross line projection onto various working surfaces.

From the beginning design of 660nm red cross line laser module, it is being made with good thermal emitting system. It gets basic use of metal heat sink cooling system and import 660nm red laser diode. It always gets increasing laser beam stability of at least 40%. In addition, under operation of the most durable anodized aluminum alloy housing tube, even though it is pointing under harsh working occasion of mechanical moving or shocking, it gets no affect by working environments. When it is operating under quite low or high temperature, within -10 to 45 degree Celsius, this red cross laser is performing well, and making quite satisfied cross line alignment for both industrial and high tech cross line alignment work fields.
On basis of the use of qualified glass coated lens with different fan angles of 10, 15 and 110 degree, whatever kind of working surface it is pointing, 660nm red cross line laser module is performing well with high linear quality red cross line source emission in continuous use. It is projecting different dimension red cross line source within 0.5 meter to 6 meters. When it makes constant cross line alignment within 8 to 10 hours, only if there is enough time and space leaving for tube cooling down, it is able to get good performance and highly clear cross line alignment for those of industrial precise cross line alignment works.
Under operation with a laser alignment mounting bracket and extending electric wires, within the maximum installed distance of 3 meters, 660nm red cross line laser module always makes convenient installation and easy cross line projection onto any raw material surface. It is making sure of no track and noncontact red cross line projection, and allowing low cost cross line alignment for all application fields. When users are aware of any thermal energy hurt to eyes and wearing correct laser safety goggles, without eye exposure to beam aperture, it makes easy and safe cross line alignment in long time use.