alignment laser – Page 9 – Red Dot, Line and Cross Line Laser Modules

Increasing Stability 100mW Gaussian Beam Red Line Laser Module

Not always relying on any manual or mechanical line aligning works, in order to make quite satisfied line projection at quite long work distance, it is just substituting by advanced laser tech applying 100mW red line laser module. It is not only making advanced use of 650nm red laser diode tech, basically equipped with inner qualified glass coated lens with different fan angle, this laser line generator is projecting highly straight and fine enough red reference line projection in use. Only after its easy installation and adjustment of both beam focus and line targeting direction, it makes the most satisfied line projection at great distance effectively.

The usual use of 100mW red line laser module is continuing for quite long time, but not simply used as a simple red laser pointer. After special use of an external DC input power supply, accepting wide range electric current within 100V to 240V, it is keeping work with continuous red reference line projection. In continuous red laser line alignment work, under increasing temperature, this laser line generator still gets perfect protection from overheating and over current in continuous use. At the same time, the special use of electric wires extension also enables freely installed distance of 3 meters, which would make the most satisfied line projection onto any vertical or horizontal surface conveniently.
After advanced use of glass coated lens and quite strict laser beam stability tests up to 24 hours, 100mW red line laser module just keeps work with high linear quality red reference line projection. In constant line projection within 8 to 10 hours per day, after enough time leaving for tube cooling down, it is just able to work with excellent laser light cycling use and extremely clear red line projection in long time use. Although it is projecting formal Gaussian beam from beam aperture, however, it is enough to fulfill moderate accuracy red line projection as expected.
Whatever kind of working surface it is pointing, 100mW red line laser module is not only making highly clear line projection at great distance, but also projecting serious thermal energy and increasing temperature in use. The special use of APC, ACC driving circuit board prevents alignment laser from overheating and over current, always obtains up to 85% beam stability in continuous use. Whenever users are making constant line projection for all industrial line measuring works, in order to avoid hurt to human eyes, users should always wear correct 650nm wavelength preventing laser safety goggles and adjust red line targeting direction so as to achieve no mistake and no track line alignment constantly.

Constant Projecting Glass Lens 650nm Red Dot Laser Module

Whenever users are trying to make quite easy and efficient dot alignment at various working distances, it is not an easy job to make simple use of a laser pointer. On contrary, after constant work on the most practically used device of 650nm red dot laser module, after simple equipment with an external DC input power supply, it makes continuous red reference dot projection on various targeting surfaces. In any occasion that this dot laser alignment tool allows easy installation and adjustment to correct position, it makes high precision dot projection in all occasions effectively.

In any occasion where users are making continuous dot projection, 650nm red dot laser module should be made with super nice thermal emitting. The special use of inner metal heat sink cooling system and APC, ACC driving circuit board are forming into excellent thermal emitting, and achieving extremely stable and reliable red reference dot projection in continuous use. In formal red dot projection, within daily constant red laser dot alignment within 8 to 10 hours, it is maintaining excellent laser light cycling use and extremely stable red dot projection in continuous use.
This glass coated lens 650nm red dot laser module allows wide range output power of 5mW to 100mW. It selects different size tube diameter of 16mm and 26mm. The selection of durable aircraft used aluminum alloy housing tube ensures excellent thermal conductivity. In addition, within wide range operating temperature of -10 degree to 45 degree Celsius, red laser alignments always keeps highly bright red laser beam emission and highly clear red reference dot projection under formal lighting and long distance within 25 meters. When this compact structure red laser gets easy installation onto industrial machine or device, it makes sure of highly stable dot projection under any mechanical moving or shocking etc.
With the assistance of laser alignment mounting bracket and specially designed electric wires extension for both 650nm red dot laser module and DC input power supply, it allowing quite easy dot targeting within three dimensions. Even though it is projecting serious electric current and overheating, however, these alignment lasers just maintains good laser light cycling use and extremely clear red reference dot projection in continuous use. Under occasion that highly powerful red laser light is generating from high power red laser up to 50mW to 100mW, it is only a necessity to avoid eye exposure to laser beam aperture and remember to wear laser safety goggles until achieving highly secured and easy measurement effectively.

Different Fan Angles 5mW 650nm Red Line Laser Module

In any type of industrial line aligning works, after special need of highly accurate and fine enough line projection onto desired working surfaces, none of manual or mechanical line aligning tool can be comparable with advanced laser diode tech applying 5mW 650nm red line laser module. It projects moderate brightness red laser beam directly from 650nm red laser diode. When it gets basic use of inner cooling system and constant electric power source from DC input power supply, this industrial stabilized laser line generator makes highly stable and reliable red line projection in continuous work effectively.

In formal textile garment processing work fields, 5mW 650nm red line laser module is a quite nice accessory part. It is helping a lot of factory workers for line cutting and line positioning onto various garment cloths. It selects external DC input power supply as its electric power source. Accepting wide range electric current within 100V to 240V, after efficient converting into lower operating voltage of 5V 1000mA DC power supply, 650nm red laser module just keeps work with continuous red reference line projection, but also keeping highly reliable performance and good protection from overheating and over current in continuous use.
After basic adoption of qualified glass coated lens or separate crystal lens, 5mW 650nm red line laser module allows easy selection of fan angle from 10 degree to 110 degree. It is projecting high linear quality red reference line projection from beam aperture. Within quite close distance of 2 meters, it is able to project extremely long line length of about 6 meters after the selection of larger lens degree of 110 degree. It is a necessity to get basic learning of line length, line thickness and work distance, only if it gets correct selection of fan angle, this laser line generator will get high precision line projection as expected.
No matter what kind of working surface it is pointing, including those of quite hard reaching places, 5mW red line laser module makes quite easy and convenient use after the assistance of laser alignment mounting bracket. Red alignment laser line is easy to reach any targeting surface. At the same time, when users are making easy roast of adjustable focus optic, it ensures immediate red laser light concentration and highly clear red line projection in continuous use. Whatever kind of working surface it is pointing, only if it is installing correctly on desired machine or equipment, within freely installed distance of 3 meters, this red laser line generator makes no track and no barrier line projection perfectly.

650nm 100mW Non Gaussian Beam Red Line Laser Module

In any type of long distance line aligning work fields, it should be not a kidding job to get accurate and precise enough line projection. However, laser tech engineer is not giving up the use of the most advanced laser diode tech, but making great technical innovation of 650nm 100mW red line laser module. It is making the best use of mature 650nm red laser diode tech, owing to its long developing history and import laser diode tech, it is becoming a real industrial stabilized laser line generator. When it is getting basic design of thermal emitting system and constant electric power source, it is able to make immediate and highly clear red reference line projection at great distance effectively.

It should be quite great technical innovation of 100mW non Gaussian beam red line laser module. Comparing with formal plastic coated lens or glass coated lens, it is adopting the best quality separate crystal lens. Especially in occasion of highly clear line projection at great distance, red alignment laser line is keeping up to 80% uniformity, which is projecting the same brightness from line middle part towards both ends. It is able to make highly precise line projection within the maximum work distance and formal lighting working occasions. Owing to the most strictest laser beam stability tests up to 24 hours, under continuous work within 8 to 10 hours, this laser line generator just works perfectly and maintains good laser light cycling use.
After advanced use of aircraft used aluminum alloy housing tube and external DC input power supply, 100mW non Gaussian distribution red line laser module is keeping continuous red reference line projection. It makes the most efficient conversion of wide range electric current of 100V to 240V into 9V DC power supply. In continuous red laser line alignment, there might be increasing temperature and electric current impact. After quite easy installation onto industrial machine or device, it is allowing freely installed distance of 3 meters, and then making non contact and no barrier line projection at great distance effectively.
Every time 100mW non Gaussian beam red line laser module is operating as an accessory part, it is always making highly clear and convenient line instruction for various industrial and high tech line aligning works. Any time users are getting basic learning of line length, line thickness and work distance, laser tech will make basic calculation and experiment so as to recommend correct optic lens degree. After proper adjustment of laser beam focus and correct wearing of laser safety goggles, this industrial alignment laser will always makes easy and no danger measurement perfectly.

Different Lengths 5mW 650nm Red Line Laser Module

Whenever users are trying to get much easy and quick line aligning solution, any type of manual or mechanical line aligning tool can be workable at all. After the most advanced use of 5mW 650nm red line laser module and basic equipment with inner cooling system and different fan angle optic lens, it is able to work with highly fine and clear red reference line projection in close distance. On basis of quite easy installation and adjustment of both laser beam focus and laser line targeting direction, this laser line generator makes easy and immediate line projection onto various working surfaces.

Non Gaussian distribution Beam Red Line Laser Module

Whatever kind of working surfaces it is pointing, 5mW 650nm red line laser module is applying for different working environments. It is a major issue to maintain good beam stability in continuous laser line alignment work. Although it is only adopting quite small size tube diameter of 16mm, however, it is still getting enough space leaving for inner metal heat sink cooling system and copper made 650nm red laser diode as its core part. The special use of durable aircraft used aluminum alloy housing tube protects laser tube itself from any mechanical shocking or calibration, but also assuring the most efficient thermal conductivity.
On basis of the most advanced use of qualified glass coated lens, without any worrying about laser light decay or dim, 5mW 650nm red line laser module is always keeping work with high linear quality and extremely fine red line projection in continuous use. It gets selected optic lens degree within 10 degree to 110 degree. Within wide range line length of 0.5 meter to 6 meters, it is only a necessity to get basic learning of line length, line thickness and work distance, laser tech engineer would just recommend users correct optic lens degree until achieving highly fine and accurate line projection immediately.
Whatever kind of industrial line aligning work field, 5mW 650nm red line laser module enables quite easy use under special of adjustable focus. Even though laser line alignment is processing at much longer distance than formal hand reaching, however, users can make quite easy screw of laser beam focus, this alignment laser will easily achieve fine and accurate enough line projection easily. Whenever this compact structure laser device gets proper installation, without freely installed distance of 3 meters, it makes no contact and no barrier line positioning result and extremely perfect protection from overheating and over current etc.

Constant Dot Positioning 5mW 635nm Red Dot Laser Module

Not simply using a simple laser pointer, manual or mechanical dot aligning tool etc, in order to get clear and accurate enough dot projection in close distance, it is always a quite efficient solution to adopt a 5mW 635nm red dot laser module. It is projecting the purest red laser light from 635nm red laser diode. It is projecting at least 3 times brighter red laser light than formal 650nm red laser, when it is being made with perfect thermal emitting system and continuous electric power source from DC input power supply, this dot laser alignment tool is just becoming a real and the most practically used industrial dot aligning tool.

In current industrial dot alignment, such as laser marking, laser engraving or drilling system, there is quite strict requirement of highly accurate dot projection in close distance. This 5mW 635nm red dot laser module keeps work with extremely low laser beam divergence of less than 1mard and

quite special laser beam mode of Tem00. It is generating high purity red laser light from beam aperture. When it accepts wide range electric current within 100V to 240V, after converting into 5V DC input power supply, this red laser dot alignment tool is workable with continuous red laser beam emission and highly clear red dot projection for close distance and formal inner room working occasion.
Even though 5mW 635nm red dot laser module is only working within quite close distance, however, it still gets serious need of high precision dot alignment onto all targeting surfaces. It adopts the most qualified glass coated lens as beam emitting source. When it keeps work with quite high laser beam transmittance and passes through quite strict laser beam stability tests up to 24 hours, it is always projecting highly clear red laser beam and red dot in constant use. In formal continuous red laser dot alignment work, within 8 to 10 hours per day, it gets reduces possibility of laser tube burning out or damage, and always keeping high precision dot projection in long term use.
Under all occasion where 5mW 635nm red dot laser module is operating as an accessory part, with the assistance of a laser alignment mounting bracket, it is making quite convenient dot projection onto any vertical or horizontal surface. Without quite serious relying on manual labor force input and the lowest time spending on prior dot positioning work, this alignment laser achieves the most satisfied dot positioning result for various industrial aligning work fields.

Easy Adjustable Focus 5mW Red Dot Laser Module

If users are getting serious relying on manual labor force input and long time spending on dot positioning tool of sticker, laser pointer or other mechanical dot aligning device, it is far more enough to achieve high efficiency dot projection onto desired working surfaces as expected. In order to get quite satisfied dot measuring result with high work efficiency, it is becoming a major trend to try 5mW red dot laser module. It is projecting moderate brightness red laser light directly from inner 650nm red laser diode. After quite easy installation and adjustment of laser beam focus, this dot laser alignment makes easy and high precision dot projection onto targeting surfaces efficiently.

When dot projecting work is processing for quite long time, not the same as a formally used red laser pointer, this 5mW red dot laser module is getting different inner design part of metal heat sink cooling system. When it is giving up the use of inner alkaline battery power source, after the selection of external DC input power supply, this red laser alignment is a real industrial dot measuring device. After quite nice thermal emitting performance and easy acceptation of wide range electric current within 100V to 240V, it is applying for majority working fields and maintaining extremely stable and reliable red dot projection in continuous work.
After quite special use of glass coated lens, different from a quite simple plastic coated lens, this 5mW red dot laser module keeps work with quite high laser beam transmittance and highly clear red dot projection in close distance. It is applying for majority of working environments. However, this red laser gets specially designed glass window in front of laser beam aperture. When red laser dot alignment is processing under moisture or dust working condition, it is not affecting at all, but always keeping clear and visible enough red dot projection for both long time and close distance as well.
Under a series of quite strict laser beam stability tests up to 24 hours and basic inner design of APC, ACC driving circuit board, 5mW red dot laser module is workable with excellent laser light cycling use and intelligent feedback of increasing temperature and serious electric current. When it is keeping work within 8 to 10 hours per day, after operation by skilled users or professionals, it keeps work with high precision dot projection onto any raw material surface. Every time users are making quite easy adjustment of laser beam focus and alignment laser dot targeting direction within three dimensions, it makes no track and no barrier dot measurement perfectly.

Efficient Aligned 50mW Red Cross Line Laser Module

When users are trying to make quite easy cross line projection at quite long work distance, not simply relying on any manual or mechanical cross line measuring device, it is a quite efficient solution to make use of a 50mW red cross line laser module. It is not able to avoid mistake caused by manual operation. The operation of advanced 650nm red laser diode tech is helping a lot to make clear enough cross line projection at quite long work distance. After quite easy installation and adjustment of laser beam focus and cross line targeting direction, this cross laser alignment tool achieves high level of accuracy measurement in distance efficiently.

The projecting beam of 50mW red cross line laser module is not as bright as popular used green laser device. When it is projecting moderate brightness red laser light from 650nm red laser diode, this direct diode laser device is workable for all formal lighting working occasions. For the most important of all, when it gets mass production and the longest developing history, it gets quite low production cost and highly stable two perpendicular lines with accurate 90 degrees easily. After easy connect with an external DC input power supply and continuous cross line projection within 8 to 10 hours per days, this red cross laser maintains high beam stability and long lifetime in proper use.
On basis of the best use of qualified glass coated lens with different fan angle of 10, 15 and 110 degree, 50mW red cross line laser module is applying for majority application fields. In a lot of industrial precise device manufacturing work fields, on basis of different cross line length within 0.5 meter to 6 meters, this cross laser alignment tool should only get correct optic lens, which will achieve quite satisfied measuring result at long distance. In order to avoid laser light decay or blur in multiple working occasion, after special use of glass window in front of laser beam aperture, it is keeping stable performance under any moisture or dust working occasion etc.
Whatever kind of working surface it is pointing, in process of the most accurate cross line projection in distance, 50mW red cross laser alignment enables easy adjustment of laser beam focus. It enables quite easy adjustment of cross line thickness and targeting direction, within the maximum operating distance of 25 meters, this alignment laser achieves quite satisfied measuring result on various surfaces. The special use of APC, ACC driving circuit board is preventing any increasing temperature and serious electric current impact. Usually within the maximum daily use of 8 to 10 hours, and freely installed distance of 3 meters, this industrial cross line laser module achieves high accuracy measurement constantly.

High Uniformity Beam 50mW 635nm Red Line Laser Module

Not simply relying on line drawing or line printing works, on basis of advanced adoption of 50mW 635nm red line laser module and easy connect with an external electric power source, it is always workable with high speed and high accuracy red line projection at great distance efficiently. It is projecting highly bright and high purity red laser light from beam aperture. For the most important of all, whenever it is getting correct selection of optic lens and adjustment of laser beam focus and line targeting direction, this laser line generator helps a lot to get highly accurate line projection at greater distance than all formal hand reaching application fields.

Comparing with formal low power laser devices, 635nm 50mW red line laser module is projecting even more intense and powerful red laser light from beam aperture, thus projecting highly visible red laser line at quite long distance and high lighting working occasions. It is generating highly pure red laser light from much shorter wavelength 635nm red laser diode. When it gets quite special laser beam mode of Tem00, it is keeping work with the lowest laser beam divergence and extremely fine and straight red reference line projection for all lighting working occasions.
When line projecting work is requiring to last for quite long time and high level of laser beam stability, 635nm 50mW red line laser module would be made with super nice thermal emitting system. It adopts a bit larger size tube diameter of 26mm, designing with quite larger space leaving for metal heat sink cooling system and APC, ACC driving circuit board inside its metal housing tube, it is achieving excellent thermal emitting and highly stable red laser line alignment within wide range operating temperature. This laser line generator is keeping continuous red line projection onto various targeting surfaces, only if it is making continuous work within recommending time of 8 to 10 hours, it is maintaining excellent laser light cycling use and extremely stable red line projection constantly.
Only according to quite special use of non Gaussian beam distribution separate crystal lens, 635nm 50mW red line laser module achieves up to 80% uniformity red laser light and extremely fine red laser line projection. Especially in use of long distance line projection, red alignment laser line is still keeping high brightness from middle part towards both ends, also getting no appearance of laser light decay or dim in constant use. According to the highest attention to powerful red laser radiation and reflection, with correct use of 635nm wavelength preventing laser safety goggles, this industrial line laser alignment tool achieves high accuracy and high fineness line projection in distance effectively.

Convenient Installed 650nm 50mW Red Line Laser Module

In advanced industrial precise device manufacturing work fields, in order to get high efficiency raw material processing work fields, it is always a quite efficient solution for users to make use of a 650nm 50mW red line laser module. It generates highly intense red laser light directly from 650nm red laser diode. It is a formal industrial line aligning device. However, when this laser line generator gets excellent use of qualified lens with different fan angle and thermal emitting system, it is able to work with increasing stability and accuracy red reference line projection in distance.

When line aligning work is processing for quite long time, not simply used for temporary dot positioning works, 650nm 50mW red line laser module gets perfectly designed thermal emitting system. It is adopting 26mm diameter aluminum alloy housing tube, after getting quite larger space leaving for inner metal heat sink cooling system and copper made red laser diode core part, this red laser line generator obtains quite nice thermal emitting and highly stable line projection in continuous use. In a lot of industrial and high tech line measuring work fields, only if it is properly installed, it is just keeping highly reliable red reference line projection, including harsh occasion of mechanical moving or calibration etc.

Whatever kind of surface where high level of accuracy line projection it is in need, 650nm 50mW red line laser module gets advanced selection of glass coated lens or separate crystal lens. It projects Gaussian or non Gaussian distribution red alser beam from beam aperture. On basis the formal accuracy line projection, it is enough to only adopt formal glass coated lens. After special use of separate crystal lens, this laser line generator is projecting up to 80% laser beam uniformity, and dhte most accurate red reference line projection at long distance. Red laser line is keeping the same brightness from middle part towards both ends, only if it gets correct selection of optic lens degree, it achieves high level of accuracy line projection at great distance.

In any industrial precise device manufacturing work field, 650nm 50mW red line laser module is operating as an accessory part. The generation with a laser alignment mounting bracket enables easy adjustment of laser line targeting direction within three dimensions, this alignment laser will make easy and highly fine red line projection onto any vertical or horizontal surface. When it is taking reducing relying on manual labor force input and prior line positioning work, after proper installation and wearing of 650nm wavelength preventing laser safety goggles, this intensity beam laser line module achieves highly secured measurement easily.