red alignment laser – Page 2 – Red Dot, Line and Cross Line Laser Modules

Low Production Cost 5mW to 100mW 658nm Red Laser Diode Modules

In various highly precise and accurate dot alignment works, it is not easy to reach with a simple red laser pointer, but just making good job with a direct diode emission too of 658nm red laser diode module. It is projecting formal brightness red laser light directly from an inner 658nm red laser diode. On basis of the best use of qualified glass coated lens and constant power source supply, only if this red dot laser gets proper installation and adjustment to correct position, it is able to work with highly clear and accurate red reference dot projection at various work distances.

Comparing with a formal red laser pointer only used for temporary dot positioning works, this 658nm red laser diode module always has to work with continuous red laser beam and red reference dot projection from beam aperture. It is getting basic use of an import red laser diode and metal heat sink cooling system. In practical use of continuous red laser dot projection, it achieves superior nice thermal emitting, and increasing laser beam stability under constant work time of 8 to 10 hours per day. Unless it is pointing under sunlight, high power red dot laser up to 50mW to 100mW also makes highly clear red dot projection for both long distance and formal lighting occasion as well.
According to the use of an external AC/DC adapter, accepting wide range electric current of 100V to 240V, this industrial stabilized 658nm red laser diode module is workable with continuous red laser beam and red reference dot projection. It is operating easy and conveniently, also getting no serious affect by working environments as well. In occasion that it gets special use of extending electric wires for both red dot laser and DC power source tail part, it enables freely installed distance of 3 meters. Even though red dot projection is processing under long distance, high height and other hard reaching places, it still makes no barrier and no mistake red dot alignment in continuous use.
With the assistance of a laser alignment mounting bracket, after proper use of 16mm and 26mm diameter metal housing tube, this 658nm red laser diode module always makes sure of the most convenient installation, and the most rapid red reference dot projection onto any raw material surface. It is making a noncontact and no barrier red reference dot. At the same time, when red alignment laser makes freely adjusted laser beam focus and red dot projection direction within three dimensions, only if users are wearing correct laser safety goggles, it always brings users highly clear and secured red dot alignment in all application fields constantly.

Continuous Dot Aligned Tool of 650nm 5mW to 100mW Red Dot Laser Modules

Whenever users are looking for a high efficiency and high accuracy dot alignment, either it is pointing at close or long distance, it is not a hard job until selecting a quite practically used device, such as a 650nm red dot laser module. It always projects forma brightness and import 650nm red laser diode as beam emitting source. In various high precision and high speed dot aligning work fields, only if it makes proper installation and adjustment onto desired machine or device, this 650nm red laser just assures easy operation and no barrier red dot generation onto various working surfaces.

Being made with an external AC/DC adapter, comparing with a simple red laser pointer only applying for temporary dot positioning works, this 650nm red dot laser module is not any longer limited for temporary dot positioning works. It is getting advanced use of an import 650nm red laser diode within 5mW to 100mW. It is getting at least 40% improvement of laser beam stability. In addition, when it is making continuous red alignment laser dot projection of 8 to 10 hours, only if there is enough time and space for tube cooling down, it is always achieving excellent laser light cycling use, and highly reliable and stable red dot projection in proper use.
Employed by an import 650nm red laser diode within 5mW to 100mW, in order to get high stability dot generation, this 650nm red dot laser module applies different dimension tube diameter of 16mm and 26mm. The durable anodized aluminum alloy housing tube assures wide range temperature stabilization, and highly stable and reliable red dot generation under any harsh occasion of moving or shocking as well. Together with electric wires for both 650nm red laser and DC power supply, within the maximum installed distance of 3 meters, it just makes continuous red laser beam emission and the most reliable red dot generation in multiple application fields.
On basis of advanced use of a laser alignment mounting bracket, whatever kind of working surface it is pointing, 650nm 5mW to 100mW red dot laser modules always makes the most convenient dot generation. According to real work distance and lighting occasion, only after correct use of output power and proper mounting onto those of industrial machine or device, this red alignment laser always brings users no barrier and no mistake use constantly. When users are taking laser safety measure and wearing correct laser safety goggles, the real use of laser dot measurement gets no affect by powerful laser light and thermal energy, and makes sure of easy and free use in all occasions perfectly.

Different Fan Angles 660nm Glass Coated Lens Red Line Laser Modules

If users are not able to make clear enough line alignment at longer distance than formal hand reaching, it is not help at all to rely on the use of a square meter or blocking board. At the same time, laser tech engineer is also making continuous technical innovation of 660nm red laser diode tech. Being made with the best quality glass coated lens with different fan angles and constant power source supply, this direct diode emission made device of laser line generator just assures high stability red laser beam and red reference line projection at various work distances.

From the very beginning design of 660nm red line laser module, it is paying high attention to its thermal emitting system. The basic use of an import 660nm red laser diode and metal heat sink cooling system are assuring at least 40% improvement of laser beam stability in continuous use. When it is getting wide range output power of 5mW to 100mW, only after correct use of 5V, 9V 1000mA DC power supply, this laser line generator is able to project highly clear and fine red reference line projection within wide range work distance and other formal lighting working occasions as well.
When 660nm red line laser module is working onto various working surfaces, it should have to work with different line lengths and line fineness in continuous use. It is applying a qualified glass coated lens within 10 to 110 degree. It is projecting high linear quality red reference line. In addition, any time it is getting serious need of highly clear and fine line source in continuous use, it has also passed through up to 24 hours aging preventing and beam stability tests. Only if this red laser line generator is operating by skilled users and professionals, within constant line alignment work of 8 to 10 hours per day, it just makes sure of highly clear and stable red line alignment at various work distances.
In a lot of application fields, including laser cutting machine, sand milling, lumber machine and other raw material processing works, this 660nm Gaussian beam red line laser module should only be working as an accessory part. With the assistance of a laser alignment mounting bracket and special use of extending electric wires, within the maximum installed distance of 3 meters, this red alignment laser always makes no barrier and no mistake line alignment in long time use. When users are aware of any powerful red laser radiation and reflection, after proper wearing of laser safety goggles, high power red line laser up to 50mW to 100mW always brings users no danger and no mistake line alignment in long distance.

The Best Performing 5mW 10mW 20mW 30mW 50mW 100mW 650nm Red Dot Laser Modules

When dot aligning work is processing at much longer work distance than formal hand reaching, it is not easy to reach with a simple red laser pointer. However, without any relying on manual labor force input and prior dot positioning work, it is always making easy and quick response dot alignment with a 650nm red dot laser module. It is an industrial stabilized dot measuring device. According to real work distance and lighting occasion, only after its correct use of output power and proper installation onto those of industrial machine, this red laser alignment always makes highly stable and clear dot alignment at various work distances.

This 650nm red dot laser module enables easy use in any industrial and high tech. Whatever kind of working surface it is pointing, it makes good use of import 650nm red laser diode and metal heat sink cooling system. It is performing well with increasing laser beam stability of at least 40%. At the same time, on basis of its wide range output power of 5mW to 100mW, after proper use of 16mm and 26mm diameter metal housing tube, it gets enough space and time leaving for tube cooling down. Without the use of sunlight, high power red dot laser is also making highly clear red dot indication under high lighting as well.
In order to get clear enough dot alignment onto different working surfaces, 650nm red dot laser module always passes through a series of strict laser beam stability tests, including super rapid electric current adding test, alternative high and low temperature changing test and up to 24 hours aging preventing test etc. It is operating easy and quick by skilled users or professionals. When it is pointing under those of harsh working occasion, after special use of glass window, this 650nm red laser alignment gets perfect protection from any moisture or dust.
According to the use of anodized aluminum alloy housing tube, within wide range operating temperature and serious electric current impact, this 650nm red dot laser module gets perfect protection, and assures highly stable dot measurement for a lot of application fields, including laser marking, laser engraving, drilling system and scientific research work etc. This red alignment laser allows quite easy screw of adjustable focus optic lens, and immediate red laser light concentration, it assures the most efficient dot generation in long time use. When users are aware of any thermal energy hurt to eyes and wearing correct 650nm wavelength preventing laser safety goggles, high power red dot laser always makes no danger and no mistake use permanently.

High Fine 635nm Non Gaussian Beam 5mW, 10mW, 20mW, 30mW, 50mW, 100mW Red Line Laser Modules

When line aligning work is processing at various work distances, it is not easy to reach with simple line drawing or line printing work. At the same time, laser tech engineer is also making continuous technical innovation of 635nm red laser diode tech. After special use of qualified separate crystal lens with different fan angles and constant power source supply, it is developing into a quite practically used device of 635nm red line laser module. In various industrial and high tech precise line alignment work fields, only after its correct use of optic lens degree and proper mounting onto those of machine or device, it makes sure of highly precise and fine red line alignment at various work distances.

635nm non Gaussian red line laser module

This 635nm red line laser module always gets constant power source from AC/DC adapter. It is in need to make continuous line alignment onto various working surfaces. Different from a simple red laser pointer only used for temporary positioning works, in order to get continuous red reference line projection, it is just selecting correct operating voltage of 5V, 9V 1000mA DC power supply. It is supporting 635nm red laser diode within wide range output power of 5mW to 100mW. At the same time, when it makes constant red laser line projection within 8 to 10 hours, after leaving enough time and space leaving for tube cooling down, this laser line generator assures excellent laser light cycling use, and highly clear and stable red line projection in continuous use.
On basis of the use of qualified separate crystal lens, whatever kind of working surface it is pointing, this 635nm red line laser module is performing with the best quality red laser light emission than formal plastic coated lens or glass coated lens. It is getting no laser light decay or blur, but also generating high linear quality and highly fine red line source with various line lengths. This laser line generator is projecting non Gaussian distribution red laser beam, and highly uniform red line. It is assuring the same line brightness from middle part towards both ends, and also making sure of precise enough line generation at various work distances.
After a series of strict laser beam stability tests and aging preventing tests, only if it makes continuous red line alignment by skilled users, this 635nm red line laser module assures good performance, and highly clear line generation for multiple application fields, including both industrial and high tech etc. When it makes proper adjustment of laser line fineness and red line projecting direction, within the maximum work distance of 25 meters, this red alignment laser gets highly precise line indication for multiple application fields.