If users are not able to make clear and fine enough cross line projection at different work distances, it is not realistic to only adopt manual labor force input or other mechanical cross line measuring device. As a result, on the basis of advanced 635nm red laser diode tech and a qualified glass coated lens inside a durable metal housing tube, it is created into a quite practically used device of a Pro red cross laser alignment. It enables quite easy installation onto those of machine or device, after its correct use of output power and proper adjustment of laser beam focus, this cross line laser module brings users quite easy reaching, good direction and highly precise vertical and horizontal lines generation at long extending distance effectively.
The real use of a pro red cross laser alignment enables constant red laser beam and red cross line projection from beam aperture. It applies an import 635nm red laser diode within 5mW to 100mW as its beam emitting source, equipped with a metal heat sink cooling system, this direct diode emission made laser device gets superior nice laser beam stability of at least 40%, and highly stable red cross line source emission within long lasting work time of 8 to 10 hours per day. For the most important of all, when red cross line laser module gets proper use by skilled users or professionals, after obeying basic laser safety measures, it just enables clear and no decay light cross line projection in proper use.
The primary use of a qualified glass coated lens and a glass window are configured with a durable anodized aluminum alloy housing tube, this Pro red cross laser alignment enables high transmittance and high density red laser light emission at long extending distance. Owing to its low laser beam divergence of less than 1mrad and special Tem00 laser beam mode, thus it gets only 0.3mm fineness at 10cm, and 1mm to 2mm at 2 meters work distance. Once red cross line laser module gets correct use of output power and proper installation, it brings users good direction and highly precise cross line measurement for various industrial and high tech fields continuously.
When pro red cross laser alignment applies APC, ACC driving circuit board, within wide range output power of 5mW to 100mW, it is able to work with ultra clear and fine cross line source generation within the longest work distance of 25 meters and multiple lighting occasion as well. It enables long lasting measurement and long serving lifetime in proper use. Any time it makes freely adjusted laser beam focus and cross line projecting direction, this alignment laser enables high efficiency and high precision cross line projection at greater distance. Only if users are taking active laser safety measures and wearing correct laser safety goggles, it brings users highly fine and secured measurement in all occasions constantly.
Tag: red cross line laser module
How to Make Easy Use of 5mW to 100mW 635nm Red Cross Line Laser Module?
Different from any other manual or mechanical cross line alignment device, once cross line generation work is processing at long extending distance, it should be a quite nice beginning for users to operate a direct diode emission made device of a 635nm red cross line laser module. Being made with a qualified glass coated lens with different fan angles and good use of thermal emitting system, once it is cooperating with a high duration and ultra compact size tube made metal housing tube, this direct diode emission made cross laser alignment brings users ultra clear and stable red cross line generation for all machinery processing works continuously.
The basic use of a 635nm red cross line laser module has to work for various environments, thus it applies the most durable anodized aluminum alloy housing tube. It is bearing wide range operating temperature and any harsh working occasion, including mechanical moving, shocking or calibration etc. As a result, whenever it is passing through a series of strict laser beam stability test, aging preventing test, alternative high and low temperature changing test, only after its proper use by skilled users, this cross laser alignment tool is easily achieving ultra stable and reliable cross line generation within long extending distance.
Cooperating with a qualified glass coated lens with different fan angles of 10, 15 and 110 degree, whatever kind of working surface it is pointing, this 635nm red cross line laser module is emitting high transmittance red laser light source, and ultra clear and fine red cross line source at long distance. It gets different cross line lengths of 0.5 meter to 6 meters. In addition, after its special laser beam mode of TEM00 laser beam and less than 1mrad laser beam divergence, this red cross laser alignment tool also enables ultra fine red cross line source generation as long as 25 meters.
According to the use of 16mm and 26mm diameter metal housing tube, together with its electric wires extension, this 635nm red cross line laser module always enables convenient installation and quick reaching of red cross line source generation onto multiple working surfaces. The unique use of adjustable focus optic lens enables high concentration red laser light source emission, and high efficiency conversion of fine and straight red cross line projection. When it alignment laser gets high power up to 50mW to 100mW, after correct wearing of laser safety goggles and avoiding eye exposure to laser beam aperture, it always brings users no danger and no mistake use for all working occasions effectively.
what is the best job of glass coated lens 635nm red cross line laser module?
different from any prior cross line drawing or printing work, no matter it is pointing at close or long distance, it should be a quite nice job to operate a high density beam emitting tool of a 635nm red cross line laser module. owing to the use of an advanced use of qualified laser diode and optic lens with different fan angles, only after its proper installation onto those of industrial machine or device, this cross laser alignment always brings users quite satisfied cross line projection at great distance and high lighting working occasions effectively.
owing to the special use of an ac/dc adapter, the genuine cross line alignment work with a 635nm red cross line laser module is continuing for a quite long time. it applies an import 635nm red laser diode within 5mw to 100mw as its beam emitting source. in practical precise cross line projection work, only after leaving time and space for tube cooling down, this cross laser alignment tool is able to make quite stable and reliable red cross line projection within the longest lasting time of 10 hours per day.
within quite long work distance and high lighting working occasion, according to real working occasion, this 635nm red cross line laser module enables correct use of output power and optic lens fan angle. employed by a qualified glass coated lens with different fan angles of 10, 15 and 110 degree, it keeps work with high linear quality and highly fine red cross line projection within 0.5 meter to 6 meters lengths. in those of industrial precise machinery processing work fields, this cross laser alignment tool is able to provide users quite satisfied measuring results for laser alignment for screen printing system, heat transfer machine, laser medical therapy, military cross line alignment, high tech and lab experiment work etc.
designed with 16mm and 26mm diameter tube design, within freely installed distance of 3 meters, this 635nm red cross line laser module always enables easy installation and quick reaching of red vertical and horizontal lines generation at different work distances. for the most important of all, owing to its special use of adjustable focus optic lens, after its immediate red laser light source concentration, this alignment laser enables increasing accuracy cross line projection at great distance and high lighting as well. users should take basic laser safety measure and wear correct laser safety goggles until achieving easy, free and long lasting cross line projection in all working occasions.
Glass Coated Lens 650nm Red Cross Line Laser Module
In process of highly clear and fine enough cross line alignment at various work distances, it is far more enough to reach with any manual or mechanical cross line drawing work at all. The genuine use of 650nm red cross line laser module is always projecting highly visible and bright red laser light at several miles far away. In practical precise cross line alignment work, owing to advanced use of qualified glass coated lens with different fan angles and constant power source supply, not simply relying on any manual labor force input, it assures the lowest price, the most stable and reliable red vertical and horizontal lines generation onto various working surfaces constantly.
Being made with high duration anodized aluminum alloy housing tube, within wide range operating temperature of -10 to 45 degree Celsius, 650nm red cross line laser module is applicable for various working environments. Even though it is making cross line alignment under harsh occasion, such as mechanical moving or shocking etc, it still gets no effect at all and maintains highly stable and reliable cross line generation in long lasting use. Cooperating with a metal heat sink cooling system inside different dimension metal housing tube, after getting superior nice thermal emitting and thermal conductivity, this cross laser alignment still makes sure of highly reliable performance and highly clear red cross line generation in long lasting use.
Whatever kind of working surface it is pointing, on basis of the use of qualified glass coated lens within different fan angles of 10, 15 and 110 degree, this 650nm red cross line laser module is working well with high linear quality and highly straight red cross line source. It projects different cross line lengths of 0.5meter to 6 meters. On basis of basic measurement and experiment of cross line length, fineness and work distance, after correct use of output power and glass coated lens degree, this red cross laser makes sure of high precision cross line measurement for both industrial and high tech precise cross line measuring fields effectively.
Available with different dimension metal housing tube design, together with electric wires for both 650nm red cross line laser module and DC power supply, it always allows convenient installation and quick reaching of red cross line source indication in continuous use. It is a necessity to mount it onto desired machine or device, after its freely adjusted laser beam focus and cross line projecting direction, this alignment laser gets high intensity red laser light and increasing accuracy cross line measurement in distance. According to high attention to laser safety issue and correct wearing of laser safety goggles, without eye exposure to beam aperture, it achieves easy and secured use in long lasting use.
Convenient Pointed 650nm Red Cross Line Laser Module
Whenever users are trying to make highly clear cross line indication, either it is pointing at close distance and long distance, it is a very easy work for users to make use of advanced laser tech applying device of 650nm red cross line laser module. It projects direct red laser beam from internal 650nm red laser diode. After quite special configuration with an external AC/DC adapter and perfect use of internal cooling system, this cross laser alignment is not only able to work with extremely intense and powerful red laser beam emission, but also projecting highly clear and accurate two perpendicular lines with accurate 90 degrees onto various working surfaces.
This 650nm red cross line laser module always enables quite easy use in any working occasion. It is adopting an external AC/DC adapter as its electric power source. It is working within 5mW to 100mW, only after correct use of 5V, 9V 1000mA DC power supply, it is able to work with continuous red laser beam emission and highly clear red cross line source generation at various work distances. Especially in occasion that high power red laser is operating, owing to special design part of electric wires extension, it is not only allowing freely installed distance of 3 meters, but also assuring the most convenient cross line projection under overheating and over current in continuous use.
Selecting internal metal heat sink cooling system and APC, ACC driving circuit board inside durable aluminum alloy housing tube, 650nm red cross line laser module is adopting different size tube diameter of 16mm and 26mm. It achieves superior nice thermal conductivity, and highly stable and reliable red cross laser source generation under multiple working environments, including mechanical moving or shocking etc. After correct use of 16mm or 26mm diameter tube design, when cross laser alignment gets enough space leaving for tube cooling down, it just maintains excellent laser light cycling use and extremely clear red cross line projecting continuously.
According to advanced use of qualified glass coated lens with different fan angles, 650nm red cross line laser module is generating different dimensions red cross line source at various work distances. After correct use of output power and fan angle, only after quite easy screw of adjustable focus optic lens, this alignment laser enables extremely fine and straight cross line generation at various work distances. Whenever users are paying high attention to thermal energy hurt to human eyes, only after proper wearing of laser safety goggles, it achieves safe and highly clear cross line generation in distance perfectly.
APC Driving Circuit 650nm Red Cross Line Laser Module
If users are looking for a quite efficient cross line alignment, no matter it is processing at close distance or long distance, it might be full of challenge before selecting a quite professional device. At the same time, after making perfect integration with import 650nm red laser diode, glass coated lens and inner cooling system, it is a great technical innovation to develop a quite practically used device of 650nm red cross line laser module. It projects moderate brightness red laser beam directly from inner laser diode, after correct mounting onto desired machine or device, it makes sure of high precision and high speed red cross line source generation at various work distances effectively.
Comparing with any simple red laser pointer only used for temporary dot positioning work, this 650nm red cross line laser module is always workable with continuous cross line projection, while still have to work with good laser beam stability. It employs import 650nm red laser diode within 5mW to 100mW, which is always working with at least 40% improvement of beam stability in use. This cross laser alignment gets basic use of inner metal heat sink cooling system inside high duration metal housing tube. When it is keeping work within 8 to 10 hours per day, after proper use by skilled used or professionals, it is maintaining excellent laser light cycling use and long lifetime of more than 8,000 hours.
Available with APC, ACC driving circuit board, 635nm red cross line laser module is workable with constant output power and electric current supply. Especially in occasion of high power red laser is operating, under increasing temperature, the intelligent feedback system is making perfect protection of any possibility of tube burning out or damage. In formal red cross line projection, users can make quite easy screw of adjustable focus optic lens. The most concentrated red laser beam is converting into extremely fine and quick cross line alignment at all work distances.
Any time 635nm red cross line laser module gets freely selected fan angles of 10, 15 and 110 degree, it generates high linear quality and different dimension cross line source in use. Usually it is passing through basic measurement and experiment, only if it gets correct output power and fan angles, this alignment laser would make quite satisfied cross line measurement within the maximum work distance of 25 meters and other formal lighting occasions. When high power red cross laser is selecting to make long distance measurement, it is a key issue to wear correct laser safety goggles until achieving secured and free use permanently.
Efficient Aligned 50mW Red Cross Line Laser Module
When users are trying to make quite easy cross line projection at quite long work distance, not simply relying on any manual or mechanical cross line measuring device, it is a quite efficient solution to make use of a 50mW red cross line laser module. It is not able to avoid mistake caused by manual operation. The operation of advanced 650nm red laser diode tech is helping a lot to make clear enough cross line projection at quite long work distance. After quite easy installation and adjustment of laser beam focus and cross line targeting direction, this cross laser alignment tool achieves high level of accuracy measurement in distance efficiently.
The projecting beam of 50mW red cross line laser module is not as bright as popular used green laser device. When it is projecting moderate brightness red laser light from 650nm red laser diode, this direct diode laser device is workable for all formal lighting working occasions. For the most important of all, when it gets mass production and the longest developing history, it gets quite low production cost and highly stable two perpendicular lines with accurate 90 degrees easily. After easy connect with an external DC input power supply and continuous cross line projection within 8 to 10 hours per days, this red cross laser maintains high beam stability and long lifetime in proper use.
On basis of the best use of qualified glass coated lens with different fan angle of 10, 15 and 110 degree, 50mW red cross line laser module is applying for majority application fields. In a lot of industrial precise device manufacturing work fields, on basis of different cross line length within 0.5 meter to 6 meters, this cross laser alignment tool should only get correct optic lens, which will achieve quite satisfied measuring result at long distance. In order to avoid laser light decay or blur in multiple working occasion, after special use of glass window in front of laser beam aperture, it is keeping stable performance under any moisture or dust working occasion etc.
Whatever kind of working surface it is pointing, in process of the most accurate cross line projection in distance, 50mW red cross laser alignment enables easy adjustment of laser beam focus. It enables quite easy adjustment of cross line thickness and targeting direction, within the maximum operating distance of 25 meters, this alignment laser achieves quite satisfied measuring result on various surfaces. The special use of APC, ACC driving circuit board is preventing any increasing temperature and serious electric current impact. Usually within the maximum daily use of 8 to 10 hours, and freely installed distance of 3 meters, this industrial cross line laser module achieves high accuracy measurement constantly.
What is The Most Accurate Red Cross Line Laser Module
What is your solution to make extremely clear and accurate cross line alignment in distance? Without the use of formal cross line printing device, such as formal manual or mechanical cross line aligning devices, it would be quite efficient solution for users to adopt red cross line laser module. It is projecting direct and quick red laser beam emission from inner 650nm red laser diode, after production with inner cooling system and continuous electric power source from DC input power supply, this red cross laser is just workable with highly clear and stable performance for all precise device manufacturing works effectively.
It should have to spend quite long time for prior manual cross line drawing work with a simple triangular meter, blocking board or square meter. However, it is far more enough to get ideal cross line alignment for quite long time and quite long work distance etc. When users are getting serious accurate and rapid measurement on various targeting surfaces, red cross line laser module is bringing users totally different experience in continuous use. When it is getting continuous electric power source of DC input power supply, supported by 3V or 9V operating voltage, this cross laser alignment tool makes sure of continuous red vertical and horizontal lines projection in distance easily.
The genuine cross line alignment with red cross line laser module would be processed for quite long time, thus it would have to be made with high level of laser beam stability in continuous work. It is adopting durable aircraft used aluminum alloy housing tube and inner cooper made red laser diode core part, cooperated with inner metal heat sink cooling system, this cross laser alignment tool achieves excellent thermal conductivity. In addition, under quite low or high temperature, it is still generating highly bright red cross line source in use. Under occasion that red cross laser is properly installed, within freely installed distance of 0.3 meter to 3 meters, it is making quite convenient two perpendicular lines generation with accurate 90 degrees.
Under freely selected optic lens degree of 10, 15 and 110 degree, under multiple application fields, red cross line laser module generates different dimension cross line source in use. Within obtained cross line length of 0.5 meter to 6 meters, under proper screw of adjustable cylindrical lens, this alignment laser gets high speed concentration of red laser light emission and super fine thickness red cross line source emission in use. Under quite professional wearing of laser safety goggles and avoiding eye exposure to powerful red light and thermal energy, this cross laser alignment tool achieves easy and free measurement perfectly.